[asterisk-users] after install the zaptel but the rtp failed

[邱磊]

hi Grygoriy :
appreciate your reply ,
that's my cli command:
CLI> zap show status 
Description                              Alarms     IRQ        bpviol     CRC4      
ZTDUMMY/1 1                              UNCONFIGUR 0          0          0   

Is't all right? forward your echo .
thanks 


2009-03-04 



邱磊 



发件人： Grygoriy Dobrovolskyy 
发送时间： 2009-03-03  18:53:47 
收件人： Asterisk Users Mailing List - Non-Commercial Discussion 
抄送： 
主题： Re: [asterisk-users] after install the zaptel but the rtp failed 
 



2009/3/3 邱磊 <qiulei212 at 163.com>

hi everyone:
now ,i have a strange situation: I want to make a meetme conference and install the zaptel1.4* in my asterisk.
every things seem well but it did't work normally.
I use the Playback app for test .It didn't reply any voice.I tried in another asterisk server the playback app work well.

i don't know why ,any some guys can give me some help?

PS: my meetme app also didn't work normally:
the asterisk log show:
 Executing [4105 at 4105:2] MeetMe("SIP/22479-08203390", "4105|Ap") in new stack
without create 4105 room!!
but i have config the meetme.conf
[rooms]
conf =>4105;

can some guys give me help!! thanks a lot
2009-03-03 



Check if your ztdummy is loaded "zap show status" in cli, or that you have a proper source of timing.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090304/f2d0d5ec/attachment.htm