[asterisk-users] clone X100p+dahdi dial out works only after receiving call

[Michael Higgins]

On Tue, 3 Mar 2009 12:04:48 +0200
Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:

> http://bugs.digium.com/view.php?id=14577 ?

Totally. Switching to fxsls from fxsks did the trick. 

Do I know what difference this makes to me? Not at all... but it 'fixes' the problem CHANUNAVAIL when it *should* be good to go.

http://bugs.digium.com/view.php?id=13927 : "Setting them to fxsls works around it by ignoring the hook state."

And here:

http://bugs.digium.com/view.php?id=13786

"Exactly the same fault as xrobau. Unable to make calls out of the FXO ports until the line has rung once. The fault is 100% reproducible by rebooting the box, and the same cycle starts over again.

"Have found a workaround which is switching from FXSKS to FXSLS for moment which is showing 100% success."

And, at the bottom:

"Already fixed before 1.6.0-rc3, indeed."

 asterisk -V

Asterisk 1.6.0.3

... so, it should, or should not, be fixed in this case? If fixed in -rc3, .3 is the actual release of the candidate, no? 

Or, surely it is applied in 1.6.0.6... I bump the ebuild to the later version, reverse my config changes and see what happens.

No change, though my SIP client sees 'call declined', or something, rather than 'service not avail'. Same problem, though, and still worked around by using -ls not -ks. 

Thanks for the clues toward a workaround... though is there some reason I should prefer 'kewl' over 'loop', or whatever this workaround implies?

Cheers,

-- 
 |\  /|        |   |          ~ ~  
 | \/ |        |---|          `|` ?
 |    |ichael  |   |iggins    \^ /
 michael.higgins[at]evolone[dot]org