[asterisk-users] How to set PRI line timeout value

[Jim Dickenson]

-- 
Jim Dickenson
mailto:dickenson at cfmc.com

CfMC
http://www.cfmc.com/



> From: "Kevin P. Fleming" <kpfleming at digium.com>
> Organization: Digium, Inc.
> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Date: Mon, 02 Mar 2009 14:41:51 -0600
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Subject: Re: [asterisk-users] How to set PRI line timeout value
> 
> Jim Dickenson wrote:
> 
>> If I set ringtimeout to 29 on the dial application call and I do not answer
>> the ringing phone then I correctly get DIALSTATUS set to NOANSWER.
> 
> What kind of phone?

I am calling my cell phone. It does not go to voice main the PRI line
disconnects before that happens. I have also tried calling a standard single
line analog phone on a single one POTS line.
> 
>> If I set ringtimeout to any value over 29 on the dial application call and I
>> do not answer the ringing phone then I go to extension h and have DIALSTATUS
>> set to CANCEL.
> 
> This probably the phone initiating a no-answer hangup, many SIP phones
> do this.
> 
No SIP involved in the call at all.

> -- 
> Kevin P. Fleming
> Digium, Inc. | Director of Software Technologies
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> skype: kpfleming | jabber: kpfleming at digium.com
> Check us out at www.digium.com & www.asterisk.org
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users