[asterisk-users] Removing line 2 from CISCO 7940g

[David Gibbons]

Mike,

1.      Remove the 'line 2' entries completely from the SEPXX.XML file.
2.      Change the 'Version' tag in the SEPXX.XML file. You need only change one digit; I usually just increment the last digit. (<version>1.0.0.0-9</version>).
3.      Restart the phone (Settings -> **#**).
4.      This should do it. If it doesn't, proceed to step 5 with caution.
5.      If the line still appears, reset the phone to factory defaults (Hold # while booting, then dial 123456789*0# when the line lights flash amber back and forth). DO NOT RESET TO FACTORY DEFAULTS IF YOU DON'T HAVE THE TFTP SERVER SETUP WITH THE FIRMWARE IMAGES. This will force the phone to re-download the SEP.XML file.

-Dave

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mike
Sent: Wednesday, June 24, 2009 5:12 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Removing line 2 from CISCO 7940g

Folks,

I have CISCO 7940g phone.  I have in the past configured the phone with two lines.  Having found the 2nd line wasn't much use, I want to remove it from the config.  I have taken it out of the SIP config file that is TFTPd to the phone but it is still showing on the phone and it is still trying to log into Asterisk with that account.  I have tried removing the config line and blanking out the options but it still persists.
Does anyoen know how to get rid of the thing?

Mike.