[asterisk-users] modifying CID for different trunks

[Grygoriy Dobrovolskyy]

2009/6/17 Oguzhan Kayhan <oguzhank at bilkent.edu.tr>

> Hi,
> I have 2 trunks connected to my asterisk installation.
> One is a inbound connection between ericsson pbx  and the other is thru a
> voip service.
>
> I am using 4 digit numbers both in ericsson and asterisk..
> And also i have full real prefix for that numbers..
> As all 290XXXX are real numbers and if smbody dials 290XXXX from outside
> XXXX starts to ring without a problem.
>
> Now.. My problem is, from asterisk side, both ericsson and trunk are
> outside trunks..
> So.. if i dont enter any Caller ID for an extension, 4 digit caller
> id(internal CID) is sent to both trunks.. This is waht i want for ericsson
> trunk but not the other one..
> So, how can i modify CID for a single trunk, so if i dial ericsson i can
> use 4 digit one, and if i dial other trunk i can add smthing like 290 to
> all outgoing CID data..
>
>
>
> Hello, you can try to do a Set(${Callerid(num)}=290XXX) before call if you
are using asterisk 1.2 the $var is different, search wiki. Tell us if it
works for you. Also your provider need to acept your number, so be sure he
is.
Have a good day.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090617/49420281/attachment.htm