[asterisk-users] Unable to use # as feature key prefix

[Danny Nicholas]

The problem is the Asterisk Read function.  It is set to accept as many 0-9
and * as you want to throw at it, then stop on # or timeout.  Unless you
disable the # stops, you can't use # in features.  I would strongly caution
against that because you would almost certainly break something else.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of martin f
krafft
Sent: Tuesday, June 16, 2009 2:29 AM
To: asterisk users mailing list
Subject: [asterisk-users] Unable to use # as feature key prefix

Hi folks,

I was using the following featuremap:

  blindxfer => *1
  disconnect => *9
  atxfer => *2
  parkcall => *7
  automixmon => *0

and everything worked.

Then the need arouse to use some features like automixmon during
a conference, but MeetMet has the * key bound to the
(admin) menu. Thus, in order to enable features like automon and 
transfers even during a conference, I tried to swap * fro # in the
featuremap:

  blindxfer => #1
  disconnect => #9
  atxfer => #2
  parkcall => #7
  automixmon => #0

Unforunately, I cannot seem to make any of the features happen,
neither during a normal call, nor during a conference.

I've tried with multiple phones.

What could be the problem?

-- 
martin | http://madduck.net/ | http://two.sentenc.es/
 
"and if the cloud bursts, thunder in your ear
 you shout and no one seems to hear
 and if the band you're in starts playing different tunes
 i'll see you on the dark side of the moon."
                                                   -- pink floyd, 1972
 
spamtraps: madduck.bogus at madduck.net