[asterisk-users] IAX2 issue?

[Gordon Henderson]

On Tue, 9 Jun 2009, Steve Kennedy wrote:

> Just founnd a weirdy. My end is Asterisk 1.2.32 using an IAX2 link to
> the US.
>
> The IP address of the remote end changed (though in the config file it's
> registered as a name i.e. asterisk.remote.end), my system didn't
> recognised the IP change, it must be cached once and then the cached
> value used for ever.

I get something similar after site power failures - my PBXs sometimes come 
up faster than the routers/DNS servers, so can't get the IP address of the 
IAX trunks, but they never seem to re-try. An iax2 reload fixes it (or 
what the end-users usually do is just power cycle the PBXs )-:

Gordon