[asterisk-users] Called party name with Cisco-2,811 gateway

[David Backeberg]

On Sun, Jun 7, 2009 at 4:20 AM, Yehavi
Bourvine<yehavi.bourvine at gmail.com> wrote:
> Hello,
>
>   I am using a Cisco 2,811 gateway to connect Asterisk over PRI to our
> Nortel TX-1 PBX. Up to now I had only the calling party names passed both
> ways. After upgrading the Cisco to the latest release (12.4.24T) it began
> honoring the "remote-part-ID" field sent by Asterisk and sends the called
> name to the Nortel. However, I still do not get the called name from the
> Nortel to Asterisk.
>
> Has anyone managed to make this working?

There are a lot of choices when you set up your interconnectivity
between your Cisco gear and the T1/PRI channels. If you post your
dialpeer for this I'll take a look, although strictly speaking this
isn't really an asterisk question.