[asterisk-users] PRI call progress issue

[David Ruggles]

Apologies. Didn't mean to omit key information, I doubt it's a problem with
* because everything else is working great so I was asking for help on
troubleshooting the PRI.

Anyway, here's the 411:
Asterisk 1.4.20, CentOS 5.2
Service Providers: Quest & Deltacom, Local Loops provided by Embarq

What snippets of the config would be helpful? I've included zapata.conf and
zaptel.conf below.

>>> zapata.conf:
;autogenerated by /usr/local/sbin/config-zaptel  do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;Sangoma A102 port 1 [slot:8 bus:1 span:5] <wanpipe5>
switchtype=dms100
context=from-pstn
group=0
signalling=pri_cpe
channel =>97-119

;Sangoma A102 port 2 [slot:8 bus:1 span:6] <wanpipe6>
switchtype=dms100
context=from-pstn
group=1
signalling=pri_cpe
channel =>121-143

>>> zaptel.conf:
# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
# Zaptel Channels Configurations (zaptel.conf)
#
loadzone=us
defaultzone=us

#Sangoma A102 port 1 [slot:8 bus:1 span:5] <wanpipe5>
span=5,0,0,esf,b8zs
bchan=97-119
hardhdlc=120

#Sangoma A102 port 2 [slot:8 bus:1 span:6] <wanpipe6>
span=6,0,0,esf,b8zs
bchan=121-143
hardhdlc=144

Thanks,

David Ruggles
CCNA MCSE (NT) CNA A+
Network Engineer	Safe Data, Inc.
(910) 285-7200	david at safedatausa.com



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
Sent: Thursday, July 23, 2009 2:19 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PRI call progress issue


David Ruggles wrote:
> is busy I'll get dead air. Can anyone suggest ways to trouble shoot this?
> Don't seem to having any other problems with the PRIs.
>   

It'd be nice to start with what version of Asterisk, what distro, who is 
your service provider and snippets of your config.

On our PRIs we show busy when a line is busy.  My systems are out of 
Michigan and Indiana.

Doug



-- 
 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users