[asterisk-users] setvar and transfer

[Danny Nicholas]

I'm going to give a "qualified" no.  The reason being is that setvar works
in a session (say SIP/100-abcdefg) and the blind transfer may spawn a new
session like Local/1-abcdefg).  So your only solid variables are the global
ones.  You can verify this by looking at CLI output with verbose set to at
least 5. 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Benny Amorsen
Sent: Thursday, July 16, 2009 2:18 PM
To: Philipp Kempgen
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] setvar and transfer

Philipp Kempgen <philipp.kempgen at amooma.de> writes:

> Benny Amorsen schrieb:
>
>> Last concern: Does setvar work even for transfers, like accountcode
>> does?
>
> I can't answer your question, but transfer != transfer. Some use
> a feature code in Asterisk, some initiate a transfer on their phone,
> some use a way to call the Transfer() application.
> Mixing it up causes a lot of confusion.

Sorry, I meant "Does setvar work even for SIP blind transfers during
calls, like accountcode codes?"


/Benny


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users