[asterisk-users] setting up phones

Mon Jul 13 13:16:16 CDT 2009

I did " set sip debug on " from the CLI

It doesn't scroll messages like it did on Fri

i tried 99# and the screen on the phone changed to an ip of 10.0.0.99 which isn't either one of the ips of the asterisk server. then it hung up

i do have a dial tone

i just figured something out after reading my post.

if i dial 60# it shows the ip 10.0.0.60 of the other phone then switch to the extension and the other phone rings. 

still can't get the 99 to call the asterisk server to work i put in the ips of the server but it hangs up right away
From: danny at debsinc.com
To: asterisk-users at lists.digium.com
Date: Mon, 13 Jul 2009 12:57:59 -0500
Subject: Re: [asterisk-users] setting up phones

I assume you get a dial tone when you pick
up the handset?    If you had a good phone-to-asterisk connection, debug would
show a connection or rejection when you did 99#.

From:
asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ott Rose

Sent: Monday, July 13, 2009 12:49
PM

To:
asterisk-users at lists.digium.com

Subject: Re: [asterisk-users]
setting up phones

added that line to the extensions.conf file because i
could find a way to add it in the GUI. I put it under the dial plan that i have
selected. i just get a busy signal i tried #99 just 99, *99 nothing works.
debugging isnt showing anything.

From: danny at debsinc.com

To: asterisk-users at lists.digium.com

Date: Mon, 13 Jul 2009 12:12:16 -0500

Subject: Re: [asterisk-users] setting up phones

Most folks (AFAIK) use TFTP to connect to
the Asterisk server.  I personally use HTTP, but that took a few days of
research to figure out.  You’re really only using that protocol for
configuration and log transfers.  The actual lifting is done on a TCP or
UDP connection.  Your posts Friday indicated that Asterisk was up and
“functional” but that you couldn’t make your phones talk to it.  I’m
thinking that instead of trying to dial phone-to-phone, that you should first
make one phone talk to asterisk using this little snippet.

-          exten => 99,1,Playback(tt-monkeys)

-          exten => 99,2,Playback(vm-goodbye)

-          exten => 99,3,hangup

When you
get your phone where it can dial 99 and get a message, you will be ready to
proceed with P2P talking.

From:
asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ott Rose

Sent: Monday, July 13, 2009 12:02
PM

To:
asterisk-users at lists.digium.com

Subject: Re: [asterisk-users]
setting up phones

Ok here is what i did. 

reinstalled asterisk (i used the make samples option) and asterisk-gui

in the gui i did the following

 created a dial plans using the defaults. no outgoing dial plans just
local

 crated two users

 logged into the web interface with each phone and pointed them to our
asterisk server. Just the Proxy server and Registrar server. 

 Still doesn't work. Should i be able to use the configuration server
settings form the phones web gui. it has the options for tftp, ftp, http,
https. I don't know how this is supposed to be configured. I still don't know
what the problem is and sip set debug off does display any info like it was
lastweek. 

I am just trying to use the gui like you suggestd

> Date: Fri, 10 Jul 2009 14:22:25 -0700

> From: asterisk.org at sedwards.com

> To: asterisk-users at lists.digium.com

> Subject: Re: [asterisk-users] setting up phones

> 

> On Fri, 10 Jul 2009, Ott Rose wrote:

> 

> > I don't think the GUI is editing the conf files correctly. I am not
sure 

> > I have configure things right. At this point i think i am going to
start 

> > from scratch.

> 

> Yea!

> -- 

> Thanks in advance,

> -------------------------------------------------------------------------

> Steve Edwards sedwards at sedwards.com
Voice: +1-760-468-3867 PST

> Newline Fax: +1-760-731-3000

> 

> _______________________________________________

> -- Bandwidth and Colocation Provided by http://www.api-digital.com --

> 

> asterisk-users mailing list

> To UNSUBSCRIBE or update options visit:

> http://lists.digium.com/mailman/listinfo/asterisk-users

Windows Live™ Hotmail®: Spread the word when you add celeb
photos to your e-mails. Check
it out.

Bing™ brings you health information from trusted sources. Try it now.

_________________________________________________________________
Bing™ brings you health information from trusted sources. Try it now.
http://www.bing.com/search?q=pet+allergy&form=MHEINA&publ=WLHMTAG&crea=TXT_MHEINA_Health_Health_PetAllergy_1x1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090713/119bfce4/attachment.htm 