[asterisk-users] setting up phones

[Ott Rose]

Here is my physical network.

We have a Adtran router that is plugged into the Asterisk server and into the circuit provided by my tel co. 

the other nic in the Asterisk box is plugged into your lan switch

the phones are plugged into the lan switch


I can ping the phones from the Asterisk server. 

Date: Thu, 9 Jul 2009 17:42:43 -0400
From: stotaro at asteriskhelpdesk.com
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] setting up phones



On Thu, Jul 9, 2009 at 5:12 PM, Ott Rose <sixfourimpala at hotmail.com> wrote:






I followed it the best I could. the phones say no service. I haven't got to setting up the SIP trunk yet I was told I could get the extensions to work so I could test between the two phones i have. I have to nics in my server. one is connect to the phone router the other to a network switch. which ip should it point to? I am guess the one connected to the switch. That is the one i can access the GUI from. Below are my users.conf setting. Notice all the spaces. I didn't put them in there they are like that in the conf


Either you did not explain your network topology very well or that is your problem.

Unless you are trying to segregate your VoIP traffic, plug everything into the switch.

If using DHCP, get the IP and try pinging the phones from the Asterisk box.


I bet it is just a network issue. 

-- 
Thanks,
Steve Totaro 
+18887771888 (Toll Free)
+12409381212 (Cell)
+12024369784 (Skype)

_________________________________________________________________
Windows Live™: Keep your life in sync. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_BR_life_in_synch_062009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090710/1caeabc3/attachment.htm