[asterisk-users] Dial stops trying after ~30s regardless

[John Regal]

Hi - yes, you are correct in that I am using AMI. I thought I could override
inline in the dialplan. I will modify the AMI call. Thanks for the quick
response - truly appreciated.
john

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Matt Riddell
Sent: Wednesday, July 08, 2009 10:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Dial stops trying after ~30s regardless

On 9/7/09 2:06 PM, John Regal wrote:
> Hi,
>
> My Dial() is set to the following, but always stops about 30 seconds
> into the call even when I set it to try for 60 seconds.
>
> exten => dialnumber,1,Dial(${DialInfo},60)
>
> I am running on 1.6.1-r199820.
>
> Is there some other setting that is overriding mine? Or an issue with
> this release? Thanks for the help.

Obviously you're not typing "dialnumber" on your phone keypad, so likely 
you are initiating the call from a call file or the manager.

Check to see what you have set for the timeout value in whatever method 
you use to make the call.

-- 
Cheers,

Matt Riddell
Director
_______________________________________________

http://www.venturevoip.com/news.php (Daily Asterisk News)
http://www.venturevoip.com/st.php (SmoothTorque Predictive Dialer)
http://www.venturevoip.com/c3.php (ConduIT3 PABX Systems)

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users