[asterisk-users] migrate from zaptel to dahdi

[Jerry Geis]

Over the weekend I tried to migrate a system from
asterisk 1.4.25, libpri 1.4.1 ZAPTEL 1.4.12.1

to
asterisk 1.4.25, libpri 1.4.7 (not 1.4.1) and DAHDI 2.2.0

I removed all old zaptel by:
        mv /etc/zaptel.conf /tmp
        mv /etc/asterisk/zapata.conf /tmp

        rm /etc/init.d/zaptel
        rm /etc/sysconfig/zaptel
        rm /etc/modprobe.d/zaptel 2> /dev/null > /dev/null
        rm /etc/udev/rules.d/zaptel.rules
        rm /etc/rc.d/rc*/*zaptel
        rm /sbin/zt*
        rm -rf /usr/share/zaptel
        rm -rf /usr/include/zaptel
  
Then I just did a CLEAN install of dahdi, libpri and asterisk again.

After upgrading incoming calls seemed to work just fine.
Outgoing calls gave me an error 99


I have a TE205P installed.

I did change the extensions.conf to use DAHDI and not Zap.

I had to quickly change back as it is a production system.

Any thoughts on what might have happened here?
I didnt know if have two libpri versions confused things or what?

ANy thoughts for the next time I try are appreciated.


Jerry