[asterisk-users] Some IAX calls do not disconnect.

[Rajkumar S]

Hi,

The servers B & C are running in a virtual machine (linux kvm) and
uses ztdummy for timing. Server A has a digium card. I am not sure if
this is the cause of the problems I am facing.

raj

On Fri, Jul 3, 2009 at 5:57 PM, Rajkumar S<rajkumars at gmail.com> wrote:
> On Fri, Jul 3, 2009 at 12:36 PM, Tim Panton<thp at westhawk.co.uk> wrote:
>> I'd try adding
>> transfer=no
>> in the B iax.conf
>
> This does not help, I still have some ghost calls in B
>
> a16-in1*CLI> core show channels
> Channel              Location             State   Application(Data)
> IAX2/a16-in1-sangoma (None)               Up      AppDial((Outgoing Line))
> IAX2/a16-in1-12174   outbound at inbound-cal Up      Dial(iax2/a16-in1-sangoma-flip
> IAX2/a16-in1-sangoma (None)               Up      AppDial((Outgoing Line))
> IAX2/a16-in1-7161    outbound at inbound-cal Up      Dial(iax2/a16-in1-sangoma-flip
> IAX2/a16-in1-a16-q1- (None)               Up      AppDial((Outgoing Line))
> IAX2/a16-in1-14813   s at queue:20           Up      Dial(iax2/a16-in1-a16-q1/queue
> IAX2/a16-in1-a16-q1- (None)               Up      AppDial((Outgoing Line))
> IAX2/a16-in1-4485    s at queue:20           Up      Dial(iax2/a16-in1-a16-q1/queue
> IAX2/a16-in1-a16-q1- (None)               Up      AppDial((Outgoing Line))
> IAX2/a16-in1-10115   s at queue:20           Up      Dial(iax2/a16-in1-a16-q1/queue
> 10 active channels
> 5 active calls
>
> raj
>