[asterisk-users] chan_mobile help.

[Razza]

I've been failing to get chan_mobile working, so am looking to the experts
to help :o)

I have followed this guide -
http://www.voipphreak.ca/2008/10/30/installing-and-configuring-chan_mobile-for-bluetooth-presence-support-in-asterisk-16/
and this guide -
http://www.geek-pages.com/articles/asterisk/howto_build_and_configure_chan_mobile_on_trixbox.html
and tried hybrids of the two which is dangerous! ;o)

 When I pair my phone to my asterisk server, I see no adverstised bluetooth
services (such as headset etc.), is that correct?

Asterisk (every 30 seconds ish) reports -
    -- Bluetooth Device PersX1 has connected.
    -- Bluetooth Device PersX1 has disconnected, reason (104).

Also, when I run "mobile search" from the CLI, I get mismatched MAC's agains
phones (e.g. the MACs and phones swap?!) -
*CLI> mobile search
Address           Name                           Usable Type    Port
    -- Bluetooth Device PersX1 has connected.
    -- Bluetooth Device PersX1 has disconnected, reason (104).
00:17:83:16:DD:85 Ray(Work)                      No     Headset 0
00:1C:CC:63:15:DD Ray pers                       No     Headset 0
00:23:45:32:78:57 BlackBerry PMWork 8310         Yes    Headset 1
00:16:41:63:3C:5C Ray pers                       No     Headset 0
00:1D:F6:C6:C1:77 BTG209604                      No     Headset 0
*CLI> mobile search
Address           Name                           Usable Type    Port
    -- Bluetooth Device PersX1 has connected.
    -- Bluetooth Device PersX1 has disconnected, reason (104).
00:16:41:63:3C:5C BTG209604                      No     Headset 0
00:23:45:32:78:57 Ray pers                       Yes    Headset 1
00:17:83:16:DD:85 Ray pers                       No     Headset 0
00:1C:CC:63:15:DD Ray(Work)                      No     Headset 0
00:1D:F6:C6:C1:77 BlackBerry PMWork 8310         No     Headset 0
*CLI>

Apparently my dongle is fully supported, lsusb -v yields -
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth
Dongle (HCI mode)
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          224 Wireless
  bDeviceSubClass         1 Radio Frequency
  bDeviceProtocol         1 Bluetooth
  bMaxPacketSize0        64
  idVendor           0x0a12 Cambridge Silicon Radio, Ltd
  idProduct          0x0001 Bluetooth Dongle (HCI mode)
  bcdDevice           31.64
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1

My /etc/bluetooth/hcid.conf is as follows -
# HCId options
options {
autoinit yes;
security auto;
pairing multi;
passkey "0202";
}
device {
name "AstTest";
class 0x3e0100;
iscan enable; pscan enable;
discovto 0;
lm accept;
lp rswitch,hold,sniff,park;
}
options {
autoinit yes;
security auto;
pairing multi;
pin_helper /etc/bluetooth/pin;
}

My /etc/asterisk/mobile.conf is as follows -
[general]
interval=30             ; Number of seconds between trying to connect to
devices.
; The following is a list of adapters we use.
; id must be unique and address is the bdaddr of the adapter from hciconfig.
; Each adapter may only have one device (headset or phone) connected at a
time.
; Add an [adapter] entry for each adapter you have.
[adapter]
id=blue
address=00:10:60:D0:EC:66
;forcemaster=yes        ; attempt to force adapter into master mode. default
is no.
;alignmentdetection=yes ; enable this if you sometimes get 'white noise' on
asterisk side of the call
                        ; its a bug in the bluetooth adapter firmware,
enabling this will compensate for it.
                        ; default is no.
[PersX1]
address=00:23:45:32:78:57       ; the address of the phone
port=2                          ; the rfcomm port number (from mobile
search)
context=incoming-mobile         ; dialplan context for incoming calls
adapter=blue                    ; adapter to use
group=1                         ; this phone is in channel group 1
;nocallsetup=yes                ; set this only if your phone reports that
it supports call progress notification, but does not do it. Motorola L6 for
example.

Help!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090705/48f085c2/attachment.htm