[asterisk-users] DAHDI

[Tzafrir Cohen]

On Thu, Jul 02, 2009 at 08:15:37PM -0700, Ira wrote:
> I finally decided it's been long enough using my ancient HP junker 
> and I built a Atom 330 based machine to replace it. I've installed 
> Centos 5, Dahdi and Asterisk 1.6.2.
> 
> After a bit of struggles getting the 1.2 version files converted to 
> 1.6 almost everything seems to be working.
> 
> All my SIP lines seem to work and calls come in as expected and all 
> my DAHDI lines work with incoming calls, but I can't make an outgoing 
> call on a DAHDI line.
> 
> The simplest line is:
> 
>     exten=> s,1, dial(DAHDI/1)

Extra space?

> 
> which says it can't create a DHADI channel and gives an unknown error 0.

astertisk -rx 'dahdi show channels'

cat /proc/dahdi/*

> 
> As far as I can tell everything is OK, but clearly it's not and I 
> don't understand why incoming calls work and outgoing calls don't.
> 
> Dahdi is using a TDM400 with 4 FXO modules. The messages at boot time 
> seem correct and "dahdi show channels" seems to indicate all three 
> dahdi channels I use are present and working.
> 
> I'm open to any suggestions.

What happens if you call in first?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir