[asterisk-users] asterisk-users Digest, Vol 54, Issue 107

bilal ghayyad bilmar_gh at yahoo.com
Sat Jan 31 13:14:56 CST 2009


Sorry, but does that mean if I disable the iptable still I have to do something else? I am talking about Fedora.

Also, do I have to give the extern ip to be my DSL router public IP? What it if is dynamic, so I have to put the ddns name?

Regards
Bilal

> 
> 
> Ok, I found the problem. I suggested that I disabled
> completely my 
> shorewall-firewall, because there were no rules loaded. But
> I were 
> mistaken... shorewall loads some kernel-modules, especially
> ip_nat_sip 
> and ip_conntrack_sip, and these modules interfere with
> asterisk!
> 
> http://www.mail-archive.com/shorewall-users@lists.sourceforge.net/msg03968.html
> 
> Regards
> Holger
> 
> 
> Holger Latz schrieb:
> > Hi all,
> > 
> > I'd like to connect a softphone at home (nat,
> dynamic-ip) to a sip-phone 
> > in the office via asterisk 1.4.21 (nat, fixed-ip). SIP
> works well, the 
> > phone is ringing, but when I pickup the call,
> there's no audio on both 
> > sides.
> > 
> > I debugged the rtp-traffic at home. As long as the
> phone is ringing, 
> > everything is fine. But after the pickup, asterisk
> sends a SIP/SDP 
> > package with its private address (192.168.100.10).
> After the softphone 
> > received this package, it tries to send RTP data to
> this address! 
> > Obviously those packages never reach asterisk...
> > 
> > Does 'externip' just works for SIP and not for
> RTP?
> > Where does the the internal IP-address come from and
> how can I set the 
> > right one?
> > 
> > 
> > My configuration:
> > 
> > [general]
> > externip = 85.XXX.XXX.XXX
> > nat = yes
> > localnet = 192.168.100.0/24
> > 
> > [42]
> > deny=0.0.0.0/0.0.0.0
> > disallow=all
> > type=friend
> > secret=XXX
> > qualify=yes
> > port=5060
> > pickupgroup=
> > permit=0.0.0.0/0.0.0.0
> > nat=yes
> > mailbox=42 at device
> > host=dynamic
> > dtmfmode=rfc2833
> > dial=SIP/42
> > context=from-internal
> > canreinvite=no
> > callgroup=
> > callerid=device <42>
> > allow=alaw
> > accountcode=
> > call-limit=50
> > 
> > 
> > Regards
> > Holger


      



More information about the asterisk-users mailing list