[asterisk-users] FAX

[Danny Nicholas]

You need to determine what codecs are expected (sip set debug on from CLI).
Commenting out the disallow=all lets * use any available codecs, but may
slow down the process or cause undesirable results by using/accounting for
unneeded or unwanted codecs.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha
Sent: Wednesday, January 28, 2009 3:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] FAX

 

Dear Sir,

 

What do you mean by manual fax? I need to offer the ability for each
extension to use voice and FAX...MAybe the voice will use G729 and the FAX
ulaw for the same extension...If I configure the device in a manner that use
ulaw for FAX and G729 for voice then this should work smoothly with an
extension where G729,ulaw, alaw are allowed?

 

Regards

On Wed, Jan 28, 2009 at 11:17 PM, Danny Nicholas <danny at debsinc.com> wrote:

The codecs should only be needed for a "manual" fax, where a voice
interaction might be expected or anticipated.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha
Sent: Wednesday, January 28, 2009 3:09 PM 


To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] FAX

 

Dear Sir,

If I commant all codecs including disallow=all, then which codec should I
define on the extensions from where I'm trying to send FAX?

Regards

On Wed, Jan 28, 2009 at 10:29 PM, Danny Nicholas <danny at debsinc.com> wrote: