[asterisk-users] Inbound Call Disconnect in 3 seconds

[David fire]

you are calling a wrong number read at the end of your last post!!!

2009/1/28 David @ULC <ucoms2001 at gmail.com>

>
>
> But we are using Vicidial and we got that file with the CD.
> Manual says so to write below lines in extension.conf file :
>
>
> _________________________________________________________________________________________________________
> Now we need to set up the dialplan to send the calls coming into this
> number to go to VICIDIAL.
>
> The following lines need to be added to your dialplan(the extensions.conf
> file) by your System
> Administrator:
> exten => 8002277655,1,Ringing    ; call ringing
> exten => 8002277655,2,Wait(1)    ; Wait 1 second for CID delivery from PRI
> exten => 8002277655,3,Answer     ; Answer the line
> exten => 8002277655,4,AGI(agi-VDAD_ALL_inbound.agi,CIDLOOKUPRC-----LB-----
>
> SALESLINE-----8002277655-----Closer-----park----------999-----1-----TESTCAMP)
> exten => 8002277655,5,Hangup
> th
> NOTE: no line break on the 4  line.
>     Then you need to reload Asterisk for this to go into effect.
>
> _________________________________________________________________________________________________________
>
>
> On Wed, Jan 28, 2009 at 9:57 PM, David @ULC <ucoms2001 at gmail.com> wrote:
>
>>
>> My Inbound calls lands , but line get disconnect in exactly 3 secs.
>>
>> Here goes my extension.conf setting :
>>
>> [from-ipkall]
>> exten => 901835,1,Ringing ; call ringing
>> exten => 901835,2,Wait(1) ; Wait 1 second for CID delivery from PRI
>> exten => 901835,3,Answer ; Answer the line
>> exten =>
>> 901835,4,AGI(agi-VDAD_ALL_inbound.agi,CIDLOOKUPRC-----LB-----SALESLINE-----901835-----Closer-----park----------999-----1-----TESTCAMP)
>> exten => 901835,5,Hangup
>>
>> What could be wrong ?
>>
>> Can it be Provider Issue ?
>>
>> CLI Output :--------------------------
>>
>> > Channel SIP/cc101-0887f498 was answered.
>> -- Executing MeetMe("SIP/cc101-0887f498", "8600051") in new stack
>> == Parsing '/etc/asterisk/meetme.conf': Found
>> -- Created MeetMe conference 1023 for conference '8600051'
>> -- Playing 'conf-onlyperson' (language 'en')
>> == Manager 'sendcron' logged off from 127.0.0.1
>> -- Executing Ringing("SIP/66.54.140.46-08874e68", "") in new stack
>> -- Executing Wait("SIP/66.54.140.46-08874e68", "1") in new stack
>> -- Executing Answer("SIP/66.54.140.46-08874e68", "") in new stack
>> -- Executing AGI("SIP/66.54.140.46-08874e68",
>> "agi-VDAD_ALL_inbound.agi|CIDLOOKUPRC-----LB-----SALESLINE-----901835-----Closer-----park----------999-----1-----TESTCAMP")
>> in new stack
>> -- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_inbound.agi
>> == Parsing '/etc/asterisk/manager.conf': Found
>> == Manager 'sendcron' logged on from 127.0.0.1
>> -- Executing AGI("Local/192*168*000*002*78600051 at default-230b,2", "agi://
>> 127.0.0.1:4577/call_log") in new stack
>> -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
>> -- Executing Dial("Local/192*168*000*002*78600051 at default-230b,2",
>> "SIP/192*168*000*002*78600051 at sip64||tTor") in new stack
>> -- Called 192*168*000*002*78600051 at sip64
>> == Spawn extension (default, 192*168*000*002*78600051, 2) exited non-zero
>> on 'Local/192*168*000*002*78600051 at default-230b,2'
>> -- Executing DeadAGI("Local/192*168*000*002*78600051 at default-230b,2",
>> "agi://127.0.0.1:4577/call_log") in new stack
>> -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
>> -- Executing DeadAGI("Local/192*168*000*002*78600051 at default-230b,2",
>> "agi://
>> 127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----0-----CANCEL----------)")
>> in new stack
>> -- AGI Script
>> agi://127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----0-----CANCEL----------)
>> completed, returning 0
>> -- AGI Script agi-VDAD_ALL_inbound.agi completed, returning 0
>> -- Executing AGI("SIP/66.54.140.46-08874e68", "agi://
>> 127.0.0.1:4577/call_log") in new stack
>> -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
>> -- Executing Dial("SIP/66.54.140.46-08874e68",
>> "SIP/192*168*000*002*8600051 at sip64||tTor") in new stack
>> -- Called 192*168*000*002*8600051 at sip64
>> -- SIP/sip64-0888b218 is circuit-busy
>> == Everyone is busy/congested at this time (1:0/1/0)
>> -- Executing Hangup("SIP/66.54.140.46-08874e68", "") in new stack
>> == Spawn extension (default, 192*168*000*002*8600051, 3) exited non-zero
>> on 'SIP/66.54.140.46-08874e68'
>> -- Executing DeadAGI("SIP/66.54.140.46-08874e68", "agi://
>> 127.0.0.1:4577/call_log") in new stack
>> -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
>> -- Executing DeadAGI("SIP/66.54.140.46-08874e68", "agi://
>> 127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----1-----CONGESTION----------)")
>> in new stack
>> -- AGI Script
>> agi://127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----1-----CONGESTION----------)
>> completed, returning 0
>> == Manager 'sendcron' logged off from 127.0.0.1
>>
>>
>>
>>
>> ______________________________________________
>>
>>
>> Why is it that "Called 192*168*000*002*8600051 at sip64" ?
>>
>> Is it trying to call 8600051 as an USA number using sip64 and thats why is
>> it hanging up in 3 secs ?
>>
>>
>>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
(\__/)
(='.'=)This is Bunny. Copy and paste bunny into your
(")_(")signature to help him gain world domination.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090128/40a51076/attachment.htm