[asterisk-users] Digium TE220 card partially detected

[Tzafrir Cohen]

On Mon, Jan 26, 2009 at 03:08:13PM +0300, Maxim Litnitskiy wrote:
> Hello folks.
> I've got a strange issue.
> When I modprobe TE220 I do not see mesages like Launching card: 0 <..>
> Setting up global serial parameters.
> You can see how I loaded and unloaded the card for several times -
> http://asteriskpbx.ru/pastebin/11
> 
> lspci can detect the card: 03:08.0 Communication controller: Digium, Inc.
> Device 0220 (rev 02)
> dahdi_hardware also:
> astpbx ~ # dahdi_hardware
> pci:0000:03:08.0     wct4xxp+     d161:0220 Wildcard TE220 (4th Gen)

Fine. The card is indeed handled by the module (+). 

> astpbx ~ #
> But dahdi_tool does not show the card and dahdi_cfg gives DAHDI_SPANCONFIG
> failed on span 1: Invalid argument (22)

Next: are you sure that it is configured for E1 and not for T1? What is
the output of:

  cat /proc/dahdi/1

> System info is provided here - http://asteriskpbx.ru/pastebin/12

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir