[asterisk-users] Portech MV-378 with Asterisk

[Pascal Bruno]

Thank you!, I will try that in a few hours and let you know what happens.



On Fri, Jan 16, 2009 at 11:01 AM, Marco Signorini <marcotasto at libero.it>wrote:

>
>
> Pascal Bruno wrote:
>
> Thanks for your reply!
>
> Can you tell me what you have in your Portech configuration settings
> (Mobile to Lan Settings; Sip Proxy settings etc...)  My sip.conf file is
> pretty similar to yours but still cant register.
>
>
>
> On Fri, Jan 16, 2009 at 3:47 AM, Marco Signorini <marcotasto at libero.it>wrote:
>
>> Emmanuel Pascal Bruno wrote:
>>
>>  Has anyone been able to configure portech's mv-378 gateway with
>> asterisk?
>>
>> I did the configuration as per the manual but it does not work.
>>
>> My server sees the portech gateway, but when the gateway is trying to
>> register to my server it fails.  It says peer is not suppose to register.
>>
>> The gateway and the asterisk box are on two different location (two
>> network, 2 differrent IP address).
>>
>> I would appreciate any kind of tutorial or advice on how to make it work.
>>
>> Thanks
>>
>> ------------------------------
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> Hi,
>> I've an installation working with Portech MV-370. I'm supposing it's quite
>> similar to what you have. If it could be useful to you, this is my sip.conf
>> configuration file.
>>
>> [GSMGtw1]
>> type=friend
>> context=from-gsm
>> host=dynamic                    ; we have a DHCP assigned address
>> secret=reallyverysecret
>> nat=no                          ; there is not NAT between phone and
>> Asterisk
>> canreinvite=no
>> dtmfmode=INFO
>> insecure=invite                 ; required to overcome authentication
>> problems in incoming calls
>> call-limit=1                       ; permit only 1 outgoing call at a time
>> disallow=all
>> allow=ulaw
>> allow=alaw
>> allow=gsm
>> qualify=500
>>
>> I remember that I've found a bug on the firmware that prevents to the unit
>> to register correctly on my asterisk box unless I'm using the raw IP address
>> instead of the name of the asterisk box. I remember something wrong in
>> cryptography chiper/dechiper based on realm... So, if you have problems,
>> let's try to specify the asterisk raw IP address in the Portech.
>>
>> Best regards,
>> Marco Signorini.
>>
>>
>>
> Hi,
>
> I don't know if the problem could be in the Mobile to Lan or Lan to Mobile
> settings because these  settings are related on how calls coming from/to
> mobile are routed.  I didn't use the Portech routing features at all because
> I need a simple GSM gateway to/from the asterisk box.
> For this reason:
> 1. The only rule I've on Mobile to Lan is CID=*; URL=mob at 192.168.0.5 where
> "mob" is the extension I've generated in the asterisk box under the context
> where the Portech operates;
> 2. The only rule I've on Lan to Mobile is URL=*; Call Num=#
>
> I think the most relevant parameters for your problem are under the
> "Service Domain" menu option (assuming that the firmware you have is similar
> to what I've). On this menu I've compiled the 1st Realm (as I've only one
> account) like that:
>
> UserName: GSMGtw1
> RegisterName: GSMGtw1
> RegisterPassword: reallyverysecret
> Domain Server: 192.168.0.5
> Proxy Server: 192.168.0.5
>
> Pay attention that, having specified the Domain Server with the raw IP
> address, asterisk needs to be able to authenticate peers associated to that.
> For this reason I've set:
>
> domain=192.168.0.5
>
> on sip.conf [general] section (remember to issue a sip reload from asterisk
> cli).
>
> Hope this helps!
>
>
> Best regards.
> Marco Signorini
>
>
>
> ========================
> Marco Signorini
> INGEGNI Tech S.r.l.
> http://www.ingegnitech.com
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090116/68cbb803/attachment.htm