[asterisk-users] Use ZAP/Dahdi channel for outbound only... noinbound?

[Tim Nelson]

This worked perfectly. Thank you!

--Tim

----- "Alexander Lopez" <Alex.Lopez at opsys.com> wrote:

> Put the channel into its own context for example call it no-answer
> 
> The in your extensions.conf file put this
> 
> [no-answer]
> Exten => s,1,Wait(240) ; Wait 4 minutes
> Exten => s,2,NoOp
> 
> It will let the phone ring for the specified time. You could add
> something
> after s,1 if you wanted asterisk to pick up incase your other
> equipment did
> not.
> 
> Alex
> 
> 
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-
> > bounces at lists.digium.com] On Behalf Of Tim Nelson
> > Sent: Sunday, January 11, 2009 12:35 AM
> > To: asterisk-users at lists.digium.com
> > Subject: [asterisk-users] Use ZAP/Dahdi channel for outbound
> only...
> > noinbound?
> > 
> > Greetings list-
> > 
> > I have a box with a single FXO card in it. I'm able to dial out
> ZAP/1 with
> > no problems and as expected. However, I would like inbound calls on
> that
> > POTS line to go unanswered by Asterisk since I have other equipment
> on the
> > line. I've setup zapata.conf for the channel without a context but
> the
> > line is still answered. I've also setup a blank context with the
> same
> > result.
> > 
> > There *must* be a way to accomplish this... right?
> > 
> > --Tim
> > 
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
> --
> > 
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users