[asterisk-users] Use ZAP/Dahdi channel for outbound only... noinbound?

[Alexander Lopez]

Put the channel into its own context for example call it no-answer

The in your extensions.conf file put this

[no-answer]
Exten => s,1,Wait(240) ; Wait 4 minutes
Exten => s,2,NoOp

It will let the phone ring for the specified time. You could add something
after s,1 if you wanted asterisk to pick up incase your other equipment did
not.

Alex



> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Tim Nelson
> Sent: Sunday, January 11, 2009 12:35 AM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] Use ZAP/Dahdi channel for outbound only...
> noinbound?
> 
> Greetings list-
> 
> I have a box with a single FXO card in it. I'm able to dial out ZAP/1 with
> no problems and as expected. However, I would like inbound calls on that
> POTS line to go unanswered by Asterisk since I have other equipment on the
> line. I've setup zapata.conf for the channel without a context but the
> line is still answered. I've also setup a blank context with the same
> result.
> 
> There *must* be a way to accomplish this... right?
> 
> --Tim
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users