[asterisk-users] install the digium card TC400P howto?

[F6HQZ]

Hi Francois,

Here is Francois too.   :-)

Why to not ask to your Digium card provider ?

Example for Zaptel (fortunately same for Dahdi) :
via Linux console and dmesg :

Registered codec translator 'DTE Encoder' with 92 transcoders
(srcs=0000000c, dsts=00000101)
Registered codec translator 'DTE Decoder' with 92 transcoders
(srcs=00000101, dsts=0000000c)
Zaptel DTE (G.729a / G.723.1) Transcoder support LOADED (firm ver = 6.12)


via CLI :

*CLI> transcoder show
0/0 encoders/decoders of 92 channels are in use.


change by this way via Linux console :

rmmmod wctc4xxp
modprobe wctc4xxp mode=g729

The module will be loaded with the "G729 exclusive mode" and 120 channels
will be available.

"dmesg" extract after that :

Registered codec translator 'DTE Encoder' with 120 transcoders
(srcs=0000000c, dsts=00000100)
Registered codec translator 'DTE Decoder' with 120 transcoders
(srcs=00000100, dsts=0000000c)
Zaptel DTE (G.729a) Transcoder support LOADED (firm ver = 6.12)
Found and successfully installed a Wildcard TC: Wildcard TC400P+TC400M


*CLI> transcoder show
0/0 encoders/decoders of 120 channels are in use.

Checks with 120 concurrent calls :

transcoder show
120/0 encoders/decoders of 120 channels are in use.


*CLI> core show channels
...SNIP...
240 active channels
120 active calls


*CLI> core show translation
         Translation times between formats (in milliseconds) for one second
of data
          Source Format (Rows) Destination Format (Columns)

          g723 gsm ulaw alaw g726aal2 adpcm slin lpc10 g729 speex ilbc g726
g722
     g723    -   -    -    -        -     -    -     -    -     -    -    - 
   -
      gsm    -   -    2    2        2     2    1     4    3    20   15
2    -
     ulaw    -   3    -    1        2     2    1     4    1    20   15
2    -
     alaw    -   3    1    -        2     2    1     4    1    20   15
2    -
 g726aal2    -   3    2    2        -     2    1     4    3    20   15
1    -
    adpcm    -   3    2    2        2     -    1     4    3    20   15
2    -
     slin    -   2    1    1        1     1    -     3    2    19   14
1    -
    lpc10    -   4    3    3        3     3    2     -    4    21   16
3    -
     g729    -   4    1    1        3     3    2     5    -    21   16
3    -
    speex    -   4    3    3        3     3    2     5    4     -   16
3    -
     ilbc    -   5    4    4        4     4    3     6    5    22    -
4    -
     g726    -   3    2    2        1     2    1     4    3    20
5    -    -
     g722    -   -    -    -        -     -    -     -    -     -    -    - 
   -


Best Regards,
Francois


  -----Message d'origine-----
  De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]De la part de BERGANZ
François
  Envoyé : mardi 25 août 2009 10:12
  À : 'Asterisk Users Mailing List - Non-Commercial Discussion'
  Objet : Re: [asterisk-users] install the digium card TC400P howto?


  Ok.

  Now, I follow the digium documents.

  I have the TC400B-user-manual-1.pdf



  Where have I to insert the mode=g729 ?







  Chapter 3

  Configuration



  At this time no zaptel.conf or zapata.conf changes are necessary to
utilize

  this card. The ‘mode’ module parameter may be used to specify which

  complex codes are allowed.

  „ mode = mixed: This default option will enable 92 calls of G.729a or

  G.723.1 (5.3Kbit)

  „ mode = g729: This option will enable 96 calls of G.729a

  „ mode = g723: This default option will enable 92 calls of G.723.1

  (5.3Kbit)







  Cordialement,

  BERGANZ François





  http://www.acropolistelecom.net

  P Pensez à l'Environnement, n'imprimez ce mail que si nécessaire.



  De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Steve Totaro
  Envoyé : lundi 24 août 2009 19:17
  À : Asterisk Users Mailing List - Non-Commercial Discussion
  Objet : Re: [asterisk-users] install the digium card TC400P howto?





  On Mon, Aug 24, 2009 at 1:06 PM, Sean Bright <sean.bright at gmail.com>
wrote:

  Steve Totaro wrote:
  > "No hardware timing source found in /proc/dahdi, loading dahdi_dummy"
  > would make me think it is not loading correctly.

  The TC400P is a transcoder card.  It is not a timing source.

  --

  Sean Bright
  sean.bright at gmail.com


  Silly me.  I forgot about those overpriced transcoder cards.

  Dollar for dollar, I will go for bogomips!


  --
  Thanks,
  Steve Totaro
  +18887771888 (Toll Free)
  +12409381212 (Cell)
  +12024369784 (Skype)

Analyse effectuée par AVG - www.avg.fr
Version: 8.5.375 / Base de données virale: 270.13.67/2326 - Date: 08/25/09
18:07:00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090826/e5c5bf56/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3150 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20090826/e5c5bf56/attachment-0001.gif