[asterisk-users] PRI worked fine for months, now it stopps working after 2-3 hours

[Loic Didelot]

Yes, I see the clearing, but the InAlarm flag stays to 1. Is there a way
to restart zaptel without restarting the server.

I tried restarting asterisk which did not help.

Loic


On Wed, 2009-08-26 at 13:27 +0300, Tzafrir Cohen wrote:
> On Wed, Aug 26, 2009 at 11:53:25AM +0200, Loic Didelot wrote:
> > Here is some more information:
> > 
> > [ 2936.169191] wcte12xp0: Missed interrupt. Increasing latency to 6 ms
> > in order to compensate.
> > [ 4734.685566] wcte12xp0: Missed interrupt. Increasing latency to 7 ms
> > in order to compensate.
> > [ 4893.695402] zaptel Disabled echo canceller because of tone (rx) on
> > channel 56
> > [ 5248.845635] wcte12xp: NMF workaround on!
> > [ 5248.845640] wcte12xp: Setting yellow alarm
> > [ 5248.845658] Zaptel: Master changed to XBUS-00/XPD-00
> > [ 5248.845777] wcte12xp0: Missed interrupt. Increasing latency to 8 ms
> > in order to compensate.
> > [ 5248.910831] wcte12xp: NMF workaround off!
> > [ 5253.908078] Zaptel: Master changed to WCT1/0
> > [ 5253.964028] wcte12xp: Clearing yellow alarm
> 
> This should have caused events to be sent on each channel of the span to
> clear the alarm. You should be able to see those events on e.g. the
> "full" log of Asterisk. Do you see them?
> 
> > [ 5335.053981] wcte12xp0: Missed interrupt. Increasing latency to 9 ms
> > in order to compensate.
> 
-- 
Loïc DIDELOT
MIXvoip S.a.
Tel: +352 20 3333 20
Fax: +352 20 3333 90
ldidelot at mixvoip.com
http://www.mixvoip.com