[asterisk-users] Zaptel -> DAHDI: now echo

[Kevin P. Fleming]

Dave Fullerton wrote:

>> The dahdi_scan tool will tell you whether hardware echocans are present
>> or not, among other methods.
>>
> 
> I tried that, but I didn't see anything that specified whether the echo 
> canceller was present. Here's the output, can you tell me what I should 
> be looking for?
> 
> root at srv210394:~# dahdi_scan
> [1]
> active=yes
> alarms=OK
> description=T2XXP (PCI) Card 0 Span 1
> name=TE2/0/1
> manufacturer=Digium
> devicetype=Wildcard TE220 (4th Gen)

It would show up in the 'devicetype' line, which should end with 'with
VPM400M', 'with VPMOCT064' or 'with VPMOCT128' in the case of a
dual/quad span card, depending on which module is attached.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
skype: kpfleming | jabber: kpfleming at digium.com
Check us out at www.digium.com & www.asterisk.org