[asterisk-users] BUG: soft lockup - CPU#1 stuck for 10s! [swapper:0]

[Matt Riddell]

On 16/08/09 12:58 AM, Lee, John (Sydney) wrote:
> I have this DELL PE2950 running Asterisk 1.4.21.2 on RHEL 5 with no
> problems since Dec last year. We are using Digium TE412P to connect to
> an E1 ISDN line. Since Dec last year, we did not add or delete any
> software or hardware. We also did not do any "yum update".
>
> The linux kernel is 2.6.18-92.1.22.el5
>
> Last week, the users reported that people from outside could not dial in
> but users can dial out. We rebooted the box and everything was fine.
>
> Suddenly, starting this week, the box froze several times a day with a
> "BUG: soft lockup - CPU#1 stuck for 10s! [swapper:0]" error message on
> the console. Before it freezes, I can see a continuous stream of error
> message ...

I'd contact Digium - they're really good with providing support - just 
add the following line and dial it:

Dial(IAX2/guest at pbx.digium.com/s at default)

-- 
Cheers,

Matt Riddell
Director
_______________________________________________

http://www.venturevoip.com/news.php (Daily Asterisk News)
http://www.venturevoip.com/st.php (SmoothTorque Predictive Dialer)
http://www.venturevoip.com/c3.php (ConduIT3 PABX Systems)