[asterisk-users] chan_dahdi refuses to build

[Boehm, Matthew]

Sorry. Fat-finger. 1.6.1.2. Found out that --with-tonezone is required
when ./configure'ing asterisk in order to get chan_dahdi to compile.

Could that be documented somewhere? Or auto checked in ./configure if
--with-dahdi is specified? Wasted over an hour trying to figure this
out.

Thanks,
-Matthew

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Kevin P. Fleming
> Sent: Friday, August 14, 2009 10:58 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] chan_dahdi refuses to build
> 
> Boehm, Matthew wrote:
> > Using asterisk 1.6.2.1 and dahdi 2.2.0.2.  dadhi-linux installed
just
> > fine. Using dahdi_dummy as there is no card in system. Did not
> install
> > libpri, again, no card.
> 
> There isn't any 1.6.2.1 release of Asterisk; which version did you try
> to build?
> 
> --
> Kevin P. Fleming
> Digium, Inc. | Director of Software Technologies
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> skype: kpfleming | jabber: kpfleming at digium.com
> Check us out at www.digium.com & www.asterisk.org
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> AstriCon 2009 - October 13 - 15 Phoenix, Arizona
> Register Now: http://www.astricon.net
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users