[asterisk-users] Call File Channel

[Duncan Turnbull]

If you use a Local channel to dial it then it will fall under the same rules

Channel: Local/numbertodial at the-context-you-want

This gets a CDR produced, it does pay to check everything works the same 
but it should be fine

Cheers Duncan

David Gibbons wrote:
>
> Context: is what the call is dumped into after it is answered, at 
> extension Extension:. I don’t think it’s related to how the call is 
> placed.
>
> I can dial the local extension SIP/170 but I’m not sure where that 
> gets me.
>
> Basically I want to have the same failover that I have for all other 
> outgoing calls on these automatic calls…
>
> Thanks
>
> Dave
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Danny 
> Nicholas
> *Sent:* Wednesday, August 12, 2009 5:17 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] Call File Channel
>
> Ok. Here’s how you would do that:
>
> Channel: SIP/170 (some local extension)
>
> CallerID: SIP/104 (another local extension)
>
> MaxRetries: 1
>
> WaitTime: 60
>
> retryTime: 5
>
> Context: your_context
>
> Extension: s
>
> This should create an extension call using your context. The context 
> can then dial out as you write it.
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *David 
> Gibbons
> *Sent:* Wednesday, August 12, 2009 4:10 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] Call File Channel
>
> Thanks Danny,
>
> I do have a dial cmd with multiple arguments in my normal outgoing 
> context. I guess my question really is:
>
> How do I tell the call file using “Channel: XXX” to use my outgoing 
> context instead of Zap/g1/xx or sip/trunk_x/xx directly?
>
> -Dave
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Danny 
> Nicholas
> *Sent:* Wednesday, August 12, 2009 5:05 PM
> *To:* 'Asterisk Users Mailing List - Non-Commercial Discussion'
> *Subject:* Re: [asterisk-users] Call File Channel
>
> Exten => s,1,Dial(SIP/trunk_x/#1&SIP/trunk_y/#2&ZAP/g1/#3,60)
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *David 
> Gibbons
> *Sent:* Wednesday, August 12, 2009 3:59 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] Call File Channel
>
> I know I’m missing something here (been a long day)…
>
> How can I specify more than one channel in a call file?
>
> I want to dial SIP/trunk_x and fail to SIP/trunk_y and fail to ZAP/g1…
>
> Thanks
>
> Dave
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2009 - October 13 - 15 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users