[asterisk-users] how to implement CLONED LINE Feature in asterisk?
Faheem
faheem_imt at yahoo.com
Tue Aug 4 04:54:12 CDT 2009
how to implement CLONED LINE Feature in asterisk
Hey, I want to implement Clone Line feature in asterisk. I am using SPA-2100.
The feature should work in this way.
There are two ports in the SPA-2100 both are registered with asterisk with same username/password, and have the same (phone number)
No
one on the phone
One
phone in use
Both
phones in use
Incoming
Calls
Both
phones ring
Phone
in use receives call waiting notification, unused phone rings
Both
phones receive call waiting notification
Outgoing
Calls
Both
phones can call out
The
unused phone can call out
Neither
phone can call out
* Inbound:
- Both ports will ring. Whichever port is picked up first, will field the call.
- Any additional calls that come in would give call waiting notification to the first line, and ring the second line.
- Once the second line is being utilized, all incoming calls will be notifications in the form of call waiting beeps.
* Outbound:
- You will have the ability to dial out from port one.
- You will be able to dial a different party on port two.
*** Note ***
- If you have an active call on port one, and pick up port two, you will NOT have the same call that is currently active on port one. The Cloned Line will share the same voice mail and will have the same telephone number as the original telephone line.
- The Cloned Line is NOT a second telephone number. The telephone number that is assigned to the second phone port on the device is the same telephone number as the number assigned to phone port one.
Thanks!
Faheem
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090804/66da0b2e/attachment.htm
More information about the asterisk-users
mailing list