[asterisk-users] dahdi_scan doesn't recognize an OpenVox A400E

[Joan Antoni Terre]

Hi everybody,



In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a
Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize
the OpenVox. This card was working correctly but suddenly stopped working
and I cannot make it work again. Both “lspci” and “dahdi_hardware” detect it
but “dahdi_scan” not and I cannot use it.



>lsppci:

*0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface*

11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01)



> dahdi_hardware:

pci:0000:0a:00.0     wctdm-       e159:0001 Wildcard TDM400P REV E/F
pci:0000:11:00.0     wcb4xxp+     d161:b410 Digium Wildcard B410P



As you can see, it seems that wctdm driver is not loaded  (minus sign beside
wctdm) but if I restart dahdi, it loads it correctly:

Loading DAHDI hardware modules:
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]

Running dahdi_cfg:                                         [  OK  ]

The dahdi_scan result is the following:

[1]

active=yes

alarms=OK

description=B4XXP (PCI) Card 0 Span 1

name=B4/0/1

manufacturer=Digium

devicetype=Wildcard B410P

location=PCI Bus 17 Slot 01

basechan=1

totchans=3

irq=66

type=digital-TE

syncsrc=0

lbo=0 db (CSU)/0-133 feet (DSX-1)

coding_opts=B8ZS,AMI,HDB3

framing_opts=ESF,D4,CCS,CRC4

coding=AMI

framing=CCS

[2]

active=yes

alarms=OK

description=B4XXP (PCI) Card 0 Span 2

name=B4/0/2

manufacturer=Digium

devicetype=Wildcard B410P

location=PCI Bus 17 Slot 01

basechan=4

totchans=3

irq=66

type=digital-TE

syncsrc=0

lbo=0 db (CSU)/0-133 feet (DSX-1)

coding_opts=B8ZS,AMI,HDB3

framing_opts=ESF,D4,CCS,CRC4

coding=AMI

framing=CCS

[3]

active=yes

alarms=OK

description=B4XXP (PCI) Card 0 Span 3

name=B4/0/3

manufacturer=Digium

devicetype=Wildcard B410P

location=PCI Bus 17 Slot 01

basechan=7

totchans=3

irq=66

type=digital-TE

syncsrc=0

lbo=0 db (CSU)/0-133 feet (DSX-1)

coding_opts=B8ZS,AMI,HDB3

framing_opts=ESF,D4,CCS,CRC4

coding=AMI

framing=CCS

[4]

active=yes

alarms=OK

description=B4XXP (PCI) Card 0 Span 4

name=B4/0/4

manufacturer=Digium

devicetype=Wildcard B410P

location=PCI Bus 17 Slot 01

basechan=10

totchans=3

irq=66

type=digital-TE

syncsrc=0

lbo=0 db (CSU)/0-133 feet (DSX-1)

coding_opts=B8ZS,AMI,HDB3

framing_opts=ESF,D4,CCS,CRC4

coding=AMI

framing=CCS



The lsdahdi result is the following:

### Span  1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS

  1 BRI        Clear       (In use) (EC: MG2)

  2 BRI        Clear       (In use) (EC: MG2)

  3 BRI        Hardware-assisted HDLC  (In use)

### Span  2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS

  4 BRI        Clear       (In use) (EC: MG2)

  5 BRI        Clear       (In use) (EC: MG2)

  6 BRI        Hardware-assisted HDLC  (In use)

### Span  3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS

  7 BRI        Clear       (In use) (EC: MG2)

  8 BRI        Clear       (In use) (EC: MG2)

  9 BRI        Hardware-assisted HDLC  (In use)

### Span  4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" AMI/CCS

 10 BRI        Clear       (In use) (EC: MG2)

 11 BRI        Clear       (In use) (EC: MG2)

 12 BRI        Hardware-assisted HDLC  (In use)





I’ve tried to re-install dahdi-linux and dahdi-tools but stay the same.

Does anybody know what could be wrong?

Many thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090804/abde4288/attachment-0001.htm