[asterisk-users] Something wrong with DAHDI signalling according to the CLI

[Tzafrir Cohen]

On Wed, Apr 29, 2009 at 07:41:14PM +0200, jonas kellens wrote:
> I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO
> modules.
> 
> When I plug one PSTN-line into a FXO-port I am able to receive calls on
> this line and I can also make calls from an internal SIP-phone to the
> external PSTN-network.
> 
> Still I am bothered about something that appears on the CLI when I do a
> reload chan_dahdi.so :
> 
> asterisk*CLI> reload chan_dahdi.so 
> -- Reloading module 'chan_dahdi' (DAHDI Telephony w/PRI) 
> == Parsing '/etc/asterisk/chan_dahdi.conf': Found 
> [Apr 29 16:26:53] WARNING[8927]: chan_dahdi.c:11951 process_dahdi:
> Ignoring any changes to 'signalling' (on reload) 

chan_dahdi does not add channels, remove channels or changes the
signalling of channels (as well as most configurations of PRI spans) on
reload.

Either restart Asterisk or use 'dahdi restart'. Both methods will
disconnect all existing DAHDI calls.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir