[asterisk-users] Zaptel Not Releasing Channel (PRI)

[Eve-Ellen Cole]

I had this problem with a box that I was using Festival tts on.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Totaro
Sent: Thursday, April 23, 2009 9:18 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Zaptel Not Releasing Channel (PRI)

I have an issue with one of my installations running Asterisk 1.4.20 that
I need some help with.

Not sure if this is new or not but Zaptel or Libpri is not releasing
channels properly.  I have had issues with calls that stay up for eight
hours, long distance on the telco side, so it is more than just a
nuisance.

Does anyone know if there was a related bug in the 1.4 branch of Asterisk,
Zaptel, Libpri?  I searched and did not find anything except references to
an issue a few years ago.  Any easy pointers before I start to dig more?

The box is running with a Digium Quad T1 card.  One port is set to
"normal" PRI settings for US to the telco.  Another span is connected to
an Adit Channel Bank and breakout box to twenty or so phones.

-- 
Thanks,
Steve Totaro 
+18887771888 (Toll Free)
+12409381212 (Cell)