[asterisk-users] random hangups: how to debug?
sean darcy
seandarcy2 at gmail.com
Wed Apr 22 16:18:10 CDT 2009
I've a TDM400 with dahdi 2.1.0.4, asterisk 1.6.1-rc5. Asterisk is
randomly hanging up calls coming over the pstn. Often it happens right
as the call is answered:
-- Starting simple switch on 'DAHDI/4-1'
[Apr 22 17:09:38] NOTICE[20123]: chan_dahdi.c:7505 ss_thread: Got event
18 (Ring Begin)...
[Apr 22 17:09:40] NOTICE[20123]: chan_dahdi.c:7505 ss_thread: Got event
2 (Ring/Answered)...
-- Executing [s at incoming-pstn-line:1] Answer("DAHDI/4-1", "") in
new stack
-- Executing [s at incoming-pstn-line:2] Wait("DAHDI/4-1", "3") in new
stack
-- Executing [s at incoming-pstn-line:3] NoOp("DAHDI/4-1", ""callerid
:""" <>") in new stack
-- Executing [s at incoming-pstn-line:4] Set("DAHDI/4-1",
"CALLERPRES()=allowed") in new stack
-- Executing [s at incoming-pstn-line:5] Dial("DAHDI/4-1",
"DAHDI/1,60") in new stack
-- Called 1
-- DAHDI/1-1 is ringing
-- DAHDI/1-1 is ringing
-- DAHDI/1-1 is ringing
-- DAHDI/1-1 answered DAHDI/4-1
-- Native bridging DAHDI/4-1 and DAHDI/1-1
-- Hungup 'DAHDI/1-1'
== Spawn extension (incoming-pstn-line, s, 5) exited non-zero on
'DAHDI/4-1'
-- Hungup 'DAHDI/4-1'
but sometimes it happens after 2-3 minutes of conversation.
I figure this is a dahdi problem, but how do I get a more detailed log
of what's happening here? Is there a way of setting up debug messages
only for dahdi? Since it's random, I'd be collecting a lot of junk to
just set debug.
sean
More information about the asterisk-users
mailing list