[asterisk-users] Sangoma A104d and Adtran 850 problems

[Jim Dickenson]

I understand that. I was speaking of the Sangoma wanpipe config files being
quite similar.

diff -u wanpipe6.conf wanpipe7.conf
--- wanpipe6.conf    2009-04-17 15:58:31.000000000 -0700
+++ wanpipe7.conf    2009-04-17 15:58:31.000000000 -0700
@@ -15,12 +15,12 @@
 #================================================
 
 [devices]
-wanpipe6 = WAN_AFT_TE1, Comment
+wanpipe7 = WAN_AFT_TE1, Comment
 
 [interfaces]
-w6g1 = wanpipe6, , TDM_VOICE, Comment
+w7g1 = wanpipe7, , TDM_VOICE, Comment
 
-[wanpipe6]
+[wanpipe7]
 CARD_TYPE     = AFT
 S514CPU     = A
 CommPort     = PRI
@@ -30,7 +30,7 @@
 FE_MEDIA    = T1
 FE_LCODE    = B8ZS
 FE_FRAME    = ESF
-FE_LINE        = 2
+FE_LINE        = 3
 TE_CLOCK     = NORMAL
 TE_REF_CLOCK    = 0
 
@@ -41,11 +41,11 @@
 UDPPORT     = 9000
 TTL        = 255
 IGNORE_FRONT_END = NO
-TDMV_SPAN    = 6
-TDMV_DCHAN    = 24
+TDMV_SPAN    = 7
+TDMV_DCHAN    = 0
 TDMV_HW_DTMF    = YES
 
-[w6g1]
+[w7g1]
 ACTIVE_CH    = ALL
 TDMV_ECHO_OFF    = NO
 TDMV_HWEC    = YES

-- 
Jim Dickenson
mailto:dickenson at cfmc.com

CfMC
http://www.cfmc.com/



> From: Lyle Giese <lyle at lcrcomputer.net>
> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Date: Sat, 18 Apr 2009 09:30:35 -0500
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Subject: Re: [asterisk-users] Sangoma A104d and Adtran 850 problems
> 
> A channel bank != PRI. A PRI is ISDN. A channel bank is not the same as
> a Primary rate ISDN line.
> 
> With a channel bank, each channel's signaling is done in the channel.
> Primary rate ISDN has a D channel to contain all signalling for the 23
> voice channels, taking over the 24th voice channel.
> 
> Lyle
> 
> Jim Dickenson wrote:
>> I have a system that I am trying to get a port on a Sangoma A104d card
>> connected to an Adtran 850 with 5 FXS modules and 1 FXO module.
>> 
>> A problem I am having is figuring out what cable should be used from the
>> port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1
>> (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5).
>> Neither one made the Sangoma port show a green light, only red.
>> 
>> Also the best I can tell the Sangoma port gets configured the same when
>> connecting a PRI line or a cable to the channel bank. Is this correct?
>> 
>> It is /etc/dahdi/system.conf that says what is connected to the port,
>> correct?
>> 
>> Here is /etc/wanpipe/wanpipe7.conf:
>> [wanpipe7]
>> CARD_TYPE     = AFT
>> S514CPU     = A
>> CommPort     = PRI
>> AUTO_PCISLOT     = NO
>> PCISLOT     = 4
>> PCIBUS      = 9
>> FE_MEDIA    = T1
>> FE_LCODE    = B8ZS
>> FE_FRAME    = ESF
>> FE_LINE        = 3
>> TE_CLOCK     = NORMAL
>> TE_REF_CLOCK    = 0
>> 
>> TE_HIGHIMPEDANCE    = NO
>> LBO         = 0DB
>> FE_TXTRISTATE    = NO
>> MTU         = 1500
>> UDPPORT     = 9000
>> TTL        = 255
>> IGNORE_FRONT_END = NO
>> TDMV_SPAN    = 7
>> TDMV_DCHAN    = 0
>> TDMV_HW_DTMF    = YES
>> 
>> [w7g1]
>> ACTIVE_CH    = ALL
>> TDMV_ECHO_OFF    = NO
>> TDMV_HWEC    = YES
>> 
>> 
>> Here is /etc/dahdi/system.conf
>> loadzone=us
>> defaultzone=us
>> 
>> #Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7>
>> span=7,0,0,esf,b8zs
>> fxols=145-164
>> fxsls=165-168
>> 
>> 
>> 
>> Here is /etc/asterisk/chan_dahdi.conf:
>> 
>> [trunkgroups]
>> 
>> [channels]
>> context=default
>> usecallerid=yes
>> hidecallerid=no
>> callwaiting=yes
>> usecallingpres=yes
>> callwaitingcallerid=yes
>> threewaycalling=yes
>> transfer=yes
>> canpark=yes
>> cancallforward=yes
>> callreturn=yes
>> echocancel=yes
>> echocancelwhenbridged=yes
>> relaxdtmf=yes
>> rxgain=0.0
>> txgain=0.0
>> group=1
>> callgroup=1
>> pickupgroup=1
>> immediate=no
>> 
>> ;Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7>
>> context=to-cbfxs
>> group=2
>> echocancel=no
>> signalling=fxo_ls
>> channel => 145-164
>> 
>> context=from-cbfxo
>> group=3
>> echocancel=no
>> signalling=fxs_ls
>> channel => 165-168
>> 
>> 
>> 
>> Held figuring this out would be appreciated!
>> 
>>   
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users