[asterisk-users] What means? Correct auth, but based on stale nonce received

[Danny Nicholas]

http://lists.digium.com/pipermail/asterisk-users/2005-July/110220.html

It means that a SIP device is re-using an old authentication challenge.
If it still registers and can place calls, there's no problem to worry
about. It's just a warning.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tiago Durante
Sent: Tuesday, April 14, 2009 11:06 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] What means? Correct auth,but based on stale nonce
received

Hi masters!

I've this Asterisk 1.4.15 running. yesterday I had to change the
firewall schema that I had before.

I use to have a FW that would be my network FW/Proxy and do the NATs
for Asterisk. This FW was receiving too many requests from my LAN and
it was making the Asterisk 'cut' the calls or reach very high latency.

Yesterday I added a new FW just for this Asterisk. The same
configuration as the old firewall, loading the same modules, same
NATs.

But now some ATAs (sip) can't register against this Asterisk and the
ones that can generates these messages:

[Apr 14 13:01:45] NOTICE[29235]: chan_sip.c:8375 check_auth: Correct
auth, but based on stale nonce received from
'sip:XXXXX at 200.X.X.X:5060'
[Apr 14 13:01:45] NOTICE[29235]: chan_sip.c:8375 check_auth: Correct
auth, but based on stale nonce received from
'sip:XXXXX at 200.X.X.X:5060'

Does any one know why this happens?

Thank you!!!

-- 
Tiago Durante

,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,.,
Perseverance is the hard work you do after you
get tired of doing the hard work you already did.
-- Newt Gingrich

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users