[asterisk-users] Asterisk-beginner : cannot make phonecallsusingAsterisk

[Brent Davidson]

Danny Nicholas wrote:
>
> Do you have include=intern in the default context?  If no, * will come 
> back with can't find peer 210 (or 211).
>
>  
>
>  
>
> *From:* asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *jonas 
> kellens
> *Sent:* Monday, April 13, 2009 11:19 AM
> *To:* asterisk-users at lists.digium.com
> *Subject:* [asterisk-users] Asterisk-beginner : cannot make phonecalls 
> usingAsterisk
>
>  
>
> Hi there,
>
> this is the first time that I'm building an Asterisk-server.
>
> I have compiled Asterisk together with Zaptel on an CentOS 5.3-system.
> Zaptel is for later, when configuring the POTS-line. Now first 
> internal communication with SIP.
>
> Thought it would go easier...
>
> I have 2 Grandstream IP-phones : BT-201 and GXP-1200.
>
> These are my settings :
>
> sip.conf :
> /[root at asterisk asterisk]# cat sip.conf/
> /[general]/
> /bindport=5060/
> /bindaddr = 0.0.0.0/
>
> /[BT201]/
> /type=friend/
> /context=intern/
> /host=192.168.4.210/
> /secret=testpaswoord/
>
> /[GXP1200]/
> /type=friend/
> /context=intern/
> /host=192.168.4.211/
> /secret=testpaswoord/
> extensions.conf :
> /[root at asterisk asterisk]# cat extensions.conf/
> /[intern]/
> /exten => 210,1,Dial(SIP/BT201)/
> /exten => 211,1,Dial(SIP/GXP1200)/
> Asterisk CLI shows me :
> /asterisk*CLI> sip reload/
> /Reloading SIP/
> /  == Parsing '/etc/asterisk/sip.conf': Found/
> /  == Parsing '/etc/asterisk/users.conf': Found/
> /  == Parsing '/etc/asterisk/sip_notify.conf': Found/
> /asterisk*CLI> sip show peers/
> /Name/username              Host            Dyn Nat ACL Port    
>  Status               /
> /GXP1200                    192.168.4.211               5060    
>  Unmonitored           /
> /BT201                      192.168.4.210               5060    
>  Unmonitored           /
> /2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 2 online, 0 
> offline]/
>
> /asterisk*CLI> dialplan show intern/
> /[ Context 'intern' created by 'pbx_config' ]/
> /  '210' =>          1. Dial(SIP/BT201)                            
> [pbx_config]/
> /  '211' =>          1. Dial(SIP/GXP1200)                          
> [pbx_config]/
>
> I pick up the phone of the BT201 and dial 211... nothing happens.
> I pick up the phone of the GXP1200 and dial 210... nothing happens.
>
> I would love to have your feedback on this. Where could this problem 
> be situated ?
>
> I notice (on the Asterisk CLI) that my SIP-phones do not register. 
> They have a fixed IP and there account information is set via the web 
> interface.
>
> Greetingz,
> Jonas.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
This is not the case since both of his phones are configured to come in 
to the "intern" context by default.  In the real world, if you intern 
context had access to outside calls and you included it in the "default" 
context and happened to allow guest access, then anybody coming in to 
your box could make outbound calls.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090413/4c4da7ff/attachment.htm