[asterisk-users] Asterisk-beginner : cannot make phonecalls using Asterisk

[jonas kellens]

Mike,

thank you for your reply.

However I do not have the option of a DHCP-server. On the network where
Asterisk needs to be implemented all is configured statically, so also
the IP-phones need to be statically assigned an IP-address. Surely this
can not be thé problem...

Greetingz,
Jonas.

On Mon, 2009-04-13 at 12:28 -0400, Michael van der Stoop wrote:

> 
> jonas kellens wrote:
> > Hi there,
> >
> > this is the first time that I'm building an Asterisk-server.
> >
> > I have compiled Asterisk together with Zaptel on an CentOS 5.3-system.
> > Zaptel is for later, when configuring the POTS-line. Now first 
> > internal communication with SIP.
> >
> > Thought it would go easier...
> >
> > I have 2 Grandstream IP-phones : BT-201 and GXP-1200.
> >
> > These are my settings :
> >
> > sip.conf :
> > /[root at asterisk asterisk]# cat sip.conf/
> > /[general]/
> > /bindport=5060/
> > /bindaddr = 0.0.0.0/
> >
> > /[BT201]/
> > /type=friend/
> > /context=intern/
> > /host=192.168.4.210/
> > /secret=testpaswoord/
> >
> > /[GXP1200]/
> > /type=friend/
> > /context=intern/
> > /host=192.168.4.211/
> > /secret=testpaswoord/
> > extensions.conf :
> > /[root at asterisk asterisk]# cat extensions.conf/
> > /[intern]/
> > /exten => 210,1,Dial(SIP/BT201)/
> > /exten => 211,1,Dial(SIP/GXP1200)/
> > Asterisk CLI shows me :
> > /asterisk*CLI> sip reload/
> > /Reloading SIP/
> > /  == Parsing '/etc/asterisk/sip.conf': Found/
> > /  == Parsing '/etc/asterisk/users.conf': Found/
> > /  == Parsing '/etc/asterisk/sip_notify.conf': Found/
> > /asterisk*CLI> sip show peers/
> > /Name/username              Host            Dyn Nat ACL Port    
> >  Status               /
> > /GXP1200                    192.168.4.211               5060    
> >  Unmonitored           /
> > /BT201                      192.168.4.210               5060    
> >  Unmonitored           /
> > /2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 2 online, 0 
> > offline]/
> >
> > /asterisk*CLI> dialplan show intern/
> > /[ Context 'intern' created by 'pbx_config' ]/
> > /  '210' =>          1. Dial(SIP/BT201)                            
> > [pbx_config]/
> > /  '211' =>          1. Dial(SIP/GXP1200)                          
> > [pbx_config]/
> >
> > I pick up the phone of the BT201 and dial 211... nothing happens.
> > I pick up the phone of the GXP1200 and dial 210... nothing happens.
> >
> > I would love to have your feedback on this. Where could this problem 
> > be situated ?
> >
> > I notice (on the Asterisk CLI) that my SIP-phones do not register. 
> > They have a fixed IP and there account information is set via the web 
> > interface.
> >
> > Greetingz,
> > Jonas.
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> I had the same issue.  I set the hosts to dynamic and and explicitly set 
> their IP's via a dhcp server using their MAC addresses.  The phones 
> registered and all is well.
> 
> Regards,
> Mike
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090413/be094da9/attachment.htm