[asterisk-users] Fwd: [asterisk-r2] MFCR2 With Unicall - canunicall affect zaptel commands?

Tue Apr 7 19:00:19 CDT 2009

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir Cohen
Sent: Tuesday, April 07, 2009 6:21 PM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Fwd: [asterisk-r2] MFCR2 With Unicall -
canunicall affect zaptel commands?

The message includes a host of irrelevant and relevant information. The
question is not clear. It is a horrible piece of top-posting mess.

Please provide the relevant configuration again and clarify your answer.

What hardware do you have? What connections do you have? Are they
working OK?

Generally chan_zap and chan_unicall should not handle the same spans

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---------- Forwarded message ----------
From: Juan Carlos Huerta <juancarloshuerta at gmail.com>
Date: 07-abr-2009 13:41
Subject: Re: [asterisk-r2] MFCR2 With Unicall - can unicall affect zaptel
commands?
To: asterisk-r2 at lists.digium.com

Please wirte to asterisk-users at lists.digium.com to get help about this
problem.

Juan Carlos
~ Lo que no te mata te fortalece ~

On Tue, Apr 7, 2009 at 1:35 PM, Giovanny Magallanes
<gmagallanes at gmail.com> wrote:
> Thanks, Juan  Carlos.
>
> Yes, I still can t type the commands in the asterisk console . I dont have
> dial tone for FXS ports .
>
>
> Regards.
>
> Giovanni.
>
>
> 2009/4/7, Juan Carlos Huerta <juancarloshuerta at gmail.com>:
>>
>> And what is the result? still with zap commands problem?
>>
>> Juan Carlos
>> ~ Lo que no te mata te fortalece ~
>>
>>
>>
>> On Tue, Apr 7, 2009 at 12:49 PM, Giovanny Magallanes
>> <gmagallanes at gmail.com> wrote:
>> > I did it:
>> >
>> > elastix*CLI> load chan_zap.so
>> > The 'load' command is deprecated and will be removed in a future
>> > release.
>> > Please use 'module load' instead.
>> >   == Parsing '/etc/asterisk/zapata.conf': Found
>> >   == Parsing '/etc/asterisk/zapata_additional.conf': Found
>> >   == Parsing '/etc/asterisk/zapata-channels.conf': Found
>> >     -- Registered channel 63, FXO Kewlstart signalling
>> >     -- Registered channel 64, FXO Kewlstart signalling
>> >     -- Registered channel 65, FXO Kewlstart signalling
>> >     -- Registered channel 66, FXO Kewlstart signalling
>> >     -- Registered channel 67, FXO Kewlstart signalling
>> >     -- Registered channel 68, FXO Kewlstart signalling
>> >     -- Registered channel 68, FXO Kewlstart signalling
>> >     -- Registered channel 69, FXO Kewlstart signalling
>> >     -- Registered channel 70, FXO Kewlstart signalling
>> >     -- Registered channel 71, FXO Kewlstart signalling
>> >     -- Registered channel 72, FXO Kewlstart signalling
>> >     -- Registered channel 73, FXO Kewlstart signalling
>> >     -- Registered channel 74, FXO Kewlstart signalling
>> >     -- Registered channel 75, FXO Kewlstart signalling
>> >     -- Registered channel 76, FXO Kewlstart signalling
>> >     -- Registered channel 77, FXO Kewlstart signalling
>> >     -- Registered channel 78, FXO Kewlstart signalling
>> > elastix*CLI>
>> >
>> > Thank you Juan
>> >
>> > Giovanni
>> >
>> >
>> > 2009/4/7, Juan Carlos Huerta <juancarloshuerta at gmail.com>:
>> >>
>> >> Try to load the chan_zap.so module manually to see if you get some
>> >> error.
>> >>
>> >> Juan Carlos
>> >> ~ Lo que no te mata te fortalece ~
>> >>
>> >>
>> >>
>> >> On Tue, Apr 7, 2009 at 12:44 PM, Giovanny Magallanes
>> >> <gmagallanes at gmail.com> wrote:
>> >> > I'm using Elastix 1.1-8 with:
>> >> >
>> >> > asterisk-1.4.19
>> >> > spandsp-0.0.4
>> >> > unicall-0.0.5pre1
>> >> > zaptel-1.4.9.2
>> >> > unicall-0.0.5pre1
>> >> > libmfcr2-0.0.3
>> >> > libsupertone-0.0.2
>> >> > libunicall-0.0.3
>> >> >
>> >> > Regards,
>> >> >
>> >> > Giovanni
>> >> >
>> >> > 2009/4/7, Giovanny Magallanes <gmagallanes at gmail.com>:
>> >> >>
>> >> >> Ok, Thanks. The chan_zap commands are unavailable, but unicall
>> >> >> commands
>> >> >> and my E1 MFC/R2 are OK.
>> >> >>
>> >> >> Giovanni
>> >> >>
>> >> >>
>> >> >> 2009/4/7, Moises Silva <moises.silva at gmail.com>:
>> >> >>>
>> >> >>> I don't understand your problem. And no, unicall has nothing to do
>> >> >>> with chan_zap.so commands.
>> >> >>>
>> >> >>> Please, in the future, don't hijack threads, open a new thread for
>> >> >>> your discussion. This time I changed the subject already.
>> >> >>>
>> >> >>> Moy
>> >> >>>
>> >> >>> On Tue, Apr 7, 2009 at 1:08 AM, Giovanny Magallanes
>> >> >>> <gmagallanes at gmail.com> wrote:
>> >> >>> > Hi, Guys.
>> >> >>> >
>> >> >>> > I did not type any zaptel commands in asterisk console. I have
>> >> >>> > installed
>> >> >>> > Elastix 1.1-8 with unicall and it is working fine with a Digium
>> >> >>> > TE212-P.
>> >> >>> >
>> >> >>> > [root at elastix asterisk]# find -P / -name chan_zap.so
>> >> >>> > /usr/lib/asterisk/modules/chan_zap.so
>> >> >>> >
>> >> >>> >
/usr/src/astunicall-1.4.19-0.1/asterisk-1.4.19/channels/chan_zap.so
>> >> >>> > [root at elastix asterisk]#
>> >> >>> > elastix*CLI> load chan_zap.so
>> >> >>> >   == Parsing '/etc/asterisk/zapata.conf': Found
>> >> >>> >   == Parsing '/etc/asterisk/zapata_additional.conf': Found
>> >> >>> >   == Parsing '/etc/asterisk/zapata-channels.conf': Found
>> >> >>> >     -- Registered channel 63, FXO Kewlstart signalling
>> >> >>> >     -- Registered channel 64, FXO Kewlstart signalling
>> >> >>> >     -- Registered channel 65, FXO Kewlstart signalling
>> >> >>> >     -- Registered channel 66, FXO Kewlstart signalling
>> >> >>> >
>> >> >>> >
>> >> >>> > Can unicall affect zaptel commands in asterisk??
>> >> >>> >
>> >> >>> > Thanks
>> >> >>> >
>> >> >>> > Giovanni Magallanes
>> >> >>> >
>> >> >>> >
>> >> >>> >
>> >> >>> > 2009/4/6, Fernando Berretta <fernando.berretta at gmail.com>:
>> >> >>> >>
>> >> >>> >> Hi,
>> >> >>> >>
>> >> >>> >> I've installed Asterisk 1.4 and Openr2 1.1 all is working well.
>> >> >>> >> I've
>> >> >>> >> connected a crossover cable to TE122 board and board lite has
>> >> >>> >> went
>> >> >>> >> green. But when I've  tried to make a call, I've got the
>> >> >>> >> following
>> >> >>> >> trace:
>> >> >>> >>
>> >> >>> >> [15:35:00:218] [Thread: 3078437776] [Chan 1] - Call started at
>> >> >>> >> Mon
>> >> >>> >> Apr
>> >> >>> >> 6 15:35:00 2009 on chan 1
>> >> >>> >> [15:35:00:218] [Thread: 3078437776] [Chan 1] - CAS Tx >>
[SEIZE]
>> >> >>> >> 0x00
>> >> >>> >> [15:35:00:218] [Thread: 3078437776] [Chan 1] - CAS Raw Tx >>
>> >> >>> >> 0x01
>> >> >>> >> [15:35:00:242] [Thread: 3078437776] [Chan 1] - Bits changed
from
>> >> >>> >> 0x08
>> >> >>> >> to
>> >> >>> >> 0x00
>> >> >>> >> [15:35:00:242] [Thread: 3078437776] [Chan 1] - CAS Rx <<
[FORCED
>> >> >>> >> RELEASE] 0x00
>> >> >>> >> [15:35:00:242] [Thread: 3078437776] [Chan 1] - Disconnection
>> >> >>> >> before
>> >> >>> >> seize ack detected![15:35:00:242] [Thread: 3078437776] [Chan 1]
>> >> >>> >> -
>> >> >>> >> Far
>> >> >>> >> end disconnected. Reason: Forced Release
>> >> >>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - Attempting to
>> >> >>> >> cancel
>> >> >>> >> timer timer 0
>> >> >>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - Cannot cancel
>> >> >>> >> timer
>> >> >>> >> 0
>> >> >>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - CAS Tx >> [CLEAR
>> >> >>> >> FORWARD]
>> >> >>> >> 0x08
>> >> >>> >> [15:35:00:245] [Thread: 3078437776] [Chan 1] - CAS Raw Tx >>
>> >> >>> >> 0x09
>> >> >>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Bits changed
from
>> >> >>> >> 0x00
>> >> >>> >> to
>> >> >>> >> 0x08
>> >> >>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - CAS Rx << [IDLE]
>> >> >>> >> 0x08
>> >> >>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Call ended
>> >> >>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Attempting to
>> >> >>> >> cancel
>> >> >>> >> timer timer 0
>> >> >>> >> [15:35:00:306] [Thread: 3081632656] [Chan 1] - Cannot cancel
>> >> >>> >> timer
>> >> >>> >> 0
>> >> >>> >>
>> >> >>> >> Is there some way to complete a call through crossover cable
>> >> >>> >> with
>> >> >>> >> R2 ?
>> >> >>> >> How should I configure dahdi ?
>> >> >>> >>
>> >> >>> >> Best Regards,
>> >> >>> >> Fernando
>> >> >>> >>
>> >> >>> >> _______________________________________________
>> >> >>> >> --Bandwidth and Colocation Provided by
>> >> >>> >> http://www.api-digital.com--
>> >> >>> >>
>> >> >>> >> asterisk-r2 mailing list
>> >> >>> >> To UNSUBSCRIBE or update options visit:
>> >> >>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >> >>> >
>> >> >>> >
>> >> >>> > _______________________________________________
>> >> >>> > --Bandwidth and Colocation Provided by
>> >> >>> > http://www.api-digital.com--
>> >> >>> >
>> >> >>> > asterisk-r2 mailing list
>> >> >>> > To UNSUBSCRIBE or update options visit:
>> >> >>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >> >>> >
>> >> >>>
>> >> >>>
>> >> >>>
>> >> >>> --
>> >> >>> "I do not agree with what you have to say, but I'll defend to the
>> >> >>> death your right to say it." Voltaire
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> --Bandwidth and Colocation Provided by
http://www.api-digital.com--
>> >> >>>
>> >> >>> asterisk-r2 mailing list
>> >> >>> To UNSUBSCRIBE or update options visit:
>> >> >>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >> >
>> >> > asterisk-r2 mailing list
>> >> > To UNSUBSCRIBE or update options visit:
>> >> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >> >
>> >>
>> >> _______________________________________________
>> >> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >>
>> >> asterisk-r2 mailing list
>> >> To UNSUBSCRIBE or update options visit:
>> >>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >
>> >
>> > _______________________________________________
>> > --Bandwidth and Colocation Provided by http://www.api-digital.com--
>> >
>> > asterisk-r2 mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-r2
>> >
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk

What is the advantage of having to scroll this far down to see what a bottom
poster had to say?