[asterisk-users] meetme dahdi and zaptel
Tzafrir Cohen
tzafrir.cohen at xorcom.com
Fri Apr 3 11:17:11 CDT 2009
On Fri, Apr 03, 2009 at 08:24:41AM -0700, Dave Poirier wrote:
> Thanks for the reply Martin. I'm pretty sure that we are running dahdi (see
> below). Could the problem be that I didn't remove the Zaptel libraries prior
> to compiling Asterisk?
No. With Asterisk >= 1.4.22 it will check for "DAHDI" rather than
"ZAPTEL" (and with Asterisk 1.4.x , x>= 22, "DAHDI" can also be zaptel
if Asterisk was built vs. Zaptel).
> If that's the case I should be able to rerun the
> ./configure without the zaptel libs and see if that fixes it.
Shouldn't be an issue.
> I'm just not
> sure what it checks for though. I did set the dahdichanname=no in the
> asterisk.conf if that makes any difference. It seemed to in calling the
> channel in the dialplan but didn't seem to effect the meetme app.
>
> Thanks,
> Dave
>
> Relevent bits from lsmod
>
> Module Size Used by
> dahdi_dummy 38984 0
> dahdi_echocan_mg2 39048 0
> xpp_usb 52304 0
> xpp 226468 1 xpp_usb
> wctc4xxp 83392 0
> dahdi_transcode 42376 1 wctc4xxp
> wcb4xxp 110756 0
> wctdm 73804 0
> wcfxo 47136 0
> wctdm24xxp 159332 0
> wcte11xp 59936 0
> wct1xxp 48544 0
> wcte12xp 102404 0
> wct4xxp 349696 24
> dahdi 232144 66
> dahdi_dummy,dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp
>
>
> >From the console...
>
> asterisk*CLI> dahdi show status
> Description Alarms IRQ bpviol
> CRC4
> T2XXP (PCI) Card 0 Span 1 OK 0 0
> 0
> T2XXP (PCI) Card 0 Span 2 RED 0 0 0
This indicates that Asterisk was built with "DAHDI" support.
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir
More information about the asterisk-users
mailing list