[asterisk-users] Dahdi, TE220 Device, and Asterisk Problem

Thu Apr 2 19:37:17 CDT 2009

make it asterisk -vvvc (CONSOLE MODE)


On Thu, Apr 2, 2009 at 7:36 PM, Martin <asterisklist at callthem.info> wrote:
> ok,
>
> 1) you're missing switchtype=euroisdn ...
>
> 2)
> so edit /etc/asteirsk/logger.conf make sure console => is not
> commented out; if it is then uncomment
>
> service asterisk stop
> asterisk -vvvng
> CLI>unload chan_zap.so
> CLI>load chan_zap.so
>
> it will tell you now what's the problem with registering the channels
>
> Martin
>
> On Thu, Apr 2, 2009 at 7:18 PM, Elliot Murdock <murdocke at gmail.com> wrote:
>> Hello!
>>
>> Here is all I got:
>>
>> system.info:
>>
>> span=1,1,0,ccs,hdb3,crc4
>> bchan=1-15
>> dchan=16
>> bchan=17-31
>> span=2,2,0,ccs,hdb3,crc4
>> bchan=32-46
>> dchan=47
>> bchan=48-62
>>
>>
>> dahdi_channels.conf:
>> ;This context forwarding incoming calls to SIP server on group (1),
>> channels 1-31
>> context=default
>> ;singnalling type
>> signalling=pri_cpe
>> accountcode=11
>> group = 1
>> channel => 1-15
>> channel => 17-31
>>
>> ;other contexts add here
>> context=default
>> signalling=pri_cpe
>> resetinterval=never
>> group = 2
>> channel => 32-46
>> channel => 48-62
>>
>> dahdi_scan:
>>
>> [1]
>> active=yes
>> alarms=RED
>> description=T2XXP (PCI) Card 0 Span 1
>> name=TE2/0/1
>> manufacturer=Digium
>> devicetype=Wildcard TE220 (4th Gen)
>> location=Board ID Switch 0
>> basechan=1
>> totchans=31
>> irq=16
>> type=digital-E1
>> syncsrc=0
>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>> coding_opts=HDB3
>> framing_opts=CCS,CRC4
>> coding=HDB3
>> framing=CCS
>> [2]
>> active=yes
>> alarms=RED
>> description=T2XXP (PCI) Card 0 Span 2
>> name=TE2/0/2
>> manufacturer=Digium
>> devicetype=Wildcard TE220 (4th Gen)
>> location=Board ID Switch 0
>> basechan=32
>> totchans=31
>> irq=16
>> type=digital-E1
>> syncsrc=0
>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>> coding_opts=HDB3
>> framing_opts=CCS,CRC4
>> coding=HDB3
>> framing=CCS
>>
>> dahdi_cfg -vv:
>> DAHDI Tools Version - 2.1.0.2
>>
>> DAHDI Version: 2.1.0.4
>> Echo Canceller(s): MG2
>> Configuration
>> ======================
>>
>> SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>
>> Channel map:
>>
>> Channel 01: Clear channel (Default) (Slaves: 01)
>> Channel 02: Clear channel (Default) (Slaves: 02)
>> Channel 03: Clear channel (Default) (Slaves: 03)
>> Channel 04: Clear channel (Default) (Slaves: 04)
>> Channel 05: Clear channel (Default) (Slaves: 05)
>> Channel 06: Clear channel (Default) (Slaves: 06)
>> Channel 07: Clear channel (Default) (Slaves: 07)
>> Channel 08: Clear channel (Default) (Slaves: 08)
>> Channel 09: Clear channel (Default) (Slaves: 09)
>> Channel 10: Clear channel (Default) (Slaves: 10)
>> Channel 11: Clear channel (Default) (Slaves: 11)
>> Channel 12: Clear channel (Default) (Slaves: 12)
>> Channel 13: Clear channel (Default) (Slaves: 13)
>> Channel 14: Clear channel (Default) (Slaves: 14)
>> Channel 15: Clear channel (Default) (Slaves: 15)
>> Channel 16: D-channel (Default) (Slaves: 16)
>> Channel 17: Clear channel (Default) (Slaves: 17)
>> Channel 18: Clear channel (Default) (Slaves: 18)
>> Channel 19: Clear channel (Default) (Slaves: 19)
>> Channel 20: Clear channel (Default) (Slaves: 20)
>> Channel 21: Clear channel (Default) (Slaves: 21)
>> Channel 22: Clear channel (Default) (Slaves: 22)
>> Channel 23: Clear channel (Default) (Slaves: 23)
>> Channel 24: Clear channel (Default) (Slaves: 24)
>> Channel 25: Clear channel (Default) (Slaves: 25)
>> Channel 26: Clear channel (Default) (Slaves: 26)
>> Channel 27: Clear channel (Default) (Slaves: 27)
>> Channel 28: Clear channel (Default) (Slaves: 28)
>> Channel 29: Clear channel (Default) (Slaves: 29)
>> Channel 30: Clear channel (Default) (Slaves: 30)
>> Channel 31: Clear channel (Default) (Slaves: 31)
>> Channel 32: Clear channel (Default) (Slaves: 32)
>> Channel 33: Clear channel (Default) (Slaves: 33)
>> Channel 34: Clear channel (Default) (Slaves: 34)
>> Channel 35: Clear channel (Default) (Slaves: 35)
>> Channel 36: Clear channel (Default) (Slaves: 36)
>> Channel 37: Clear channel (Default) (Slaves: 37)
>> Channel 38: Clear channel (Default) (Slaves: 38)
>> Channel 39: Clear channel (Default) (Slaves: 39)
>> Channel 40: Clear channel (Default) (Slaves: 40)
>> Channel 41: Clear channel (Default) (Slaves: 41)
>> Channel 42: Clear channel (Default) (Slaves: 42)
>> Channel 43: Clear channel (Default) (Slaves: 43)
>> Channel 44: Clear channel (Default) (Slaves: 44)
>> Channel 45: Clear channel (Default) (Slaves: 45)
>> Channel 46: Clear channel (Default) (Slaves: 46)
>> Channel 47: D-channel (Default) (Slaves: 47)
>> Channel 48: Clear channel (Default) (Slaves: 48)
>> Channel 49: Clear channel (Default) (Slaves: 49)
>> Channel 50: Clear channel (Default) (Slaves: 50)
>> Channel 51: Clear channel (Default) (Slaves: 51)
>> Channel 52: Clear channel (Default) (Slaves: 52)
>> Channel 53: Clear channel (Default) (Slaves: 53)
>> Channel 54: Clear channel (Default) (Slaves: 54)
>> Channel 55: Clear channel (Default) (Slaves: 55)
>> Channel 56: Clear channel (Default) (Slaves: 56)
>> Channel 57: Clear channel (Default) (Slaves: 57)
>> Channel 58: Clear channel (Default) (Slaves: 58)
>> Channel 59: Clear channel (Default) (Slaves: 59)
>> Channel 60: Clear channel (Default) (Slaves: 60)
>> Channel 61: Clear channel (Default) (Slaves: 61)
>> Channel 62: Clear channel (Default) (Slaves: 62)
>>
>> 62 channels to configure.
>>
>> But, "pri show spans", nothing shows up.
>>
>> Thanks!
>> Elliot
>> On Fri, Apr 3, 2009 at 3:08 AM, Martin <asterisklist at callthem.info> wrote:
>>> maybe you have to call the dahdi_scan with some argument to
>>> autogenerate config files ...
>>>
>>> for any dahdi T1/E1 card you have to work properly you have to have
>>> /etc/dahdi/system.conf
>>> configured with span= and bchan= and dchan= keyword
>>> and /etc/asterisk/dahdi*.conf with channel => keyword.
>>>
>>> check it out ... this is the first step...
>>>
>>> dahdi_cfg -vv should show all your 64 channels
>>>
>>> Martin
>>>
>>> On Thu, Apr 2, 2009 at 6:36 PM, Elliot Murdock <murdocke at gmail.com> wrote:
>>>> Hello!
>>>>
>>>> I am trying to configure my digium TE220 dual-span pci express card
>>>> with Dahdi.  I seemed to have managed to set up the card with the
>>>> Dahdi kernel, as demonstrated by executing dahdi_scan:
>>>>
>>>> [1]
>>>> active=yes
>>>> alarms=RED
>>>> description=T2XXP (PCI) Card 0 Span 1
>>>> name=TE2/0/1
>>>> manufacturer=Digium
>>>> devicetype=Wildcard TE220 (4th Gen)
>>>> location=Board ID Switch 0
>>>> basechan=1
>>>> totchans=31
>>>> irq=16
>>>> type=digital-E1
>>>> syncsrc=0
>>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>>> coding_opts=HDB3
>>>> framing_opts=CCS,CRC4
>>>> coding=HDB3
>>>> framing=CCS
>>>> [2]
>>>> active=yes
>>>> alarms=RED
>>>> description=T2XXP (PCI) Card 0 Span 2
>>>> name=TE2/0/2
>>>> manufacturer=Digium
>>>> devicetype=Wildcard TE220 (4th Gen)
>>>> location=Board ID Switch 0
>>>> basechan=32
>>>> totchans=31
>>>> irq=16
>>>> type=digital-E1
>>>> syncsrc=0
>>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>>> coding_opts=HDB3
>>>> framing_opts=CCS,CRC4
>>>> coding=HDB3
>>>> framing=CCS
>>>>
>>>> However, when calling a "pri show spans" in asterisk, nothing comes
>>>> up.  Although the physical cables are not yet connected, shouldn't it
>>>> state something like:
>>>>
>>>> PRI span 1/0: Provisioned, In Alarm, Down, Active
>>>> PRI span 2/0: Provisioned, In Alarm, Down, Active
>>>>
>>>> Any help will  be appreciated!
>>>> Elliot
>>>>
>>>> _______________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>