[asterisk-users] problema con una x100p

[Brandon B.]

Follow instructions from the following line to configure Asterisk 1.2 with
zaptel drivers for the X100P. If you are using dahdi-linux drivers instead
of zaptel, then instead of zaptel.conf you need to have a properly
configured /etc/dahdi/system.conf and instead of /etc/asterisk/zapata.conf
use this file instead /etc/asterisk/chan_dahdi.conf.

   http://users.telenet.be/Asterisk-PBX/InstallWildcard.htm

Since it sounds like you have not used Asterisk before, you should
read "Asterisk:
the future of telephony <http://astbook.asteriskdocs.org/> and look through
the pages at voip-info.org to get started.





2009/4/2 Manolet Gmail <manolet at gmail.com>

> system.conf:
>
> # Global data
>
> loadzone        = us
> defaultzone     = us
>
> el archivo /etc/asterisk/chan/dahdi.conf no existe, estoy usando
> asterisk 1.2 de todas maneras como dije ztcfg -v tampoco muestra la
> tarjeta, asi que de ninguna forma la va a ver asterisk, si hago en
> asterisk dahdi show channels no aparece nada.
>
> 2009/4/2 Brandon B. <brandon at brellsystems.com>:
> > nos muestran la configuración de sus líneas de /etc/dahdi/system.conf y
> > /etc/asterisk/chan/dahdi.conf
> >
> >
> >
> > 2009/4/2 Manolet Gmail <manolet at gmail.com>
> >>
> >> Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic
> >>
> >> Quiero configurar una tarjeta x100p i usarla con asterisk, asi que
> >> descague compile e instale lo siguiente:
> >>
> >> asterisk-1.4.24
> >> dahdi-linux-2.1.0.4
> >> dahdi-tools-2.1.0.2
> >> libpri-1.4.9
> >>
> >> Sin embargo no logro configurar la tarjeta con exito, ya probe casi
> todo.
> >>
> >> Esto aparece si ejecuto lspci:
> >> 04:06.0 Communication controller: Motorola Wildcard X100P
> >>
> >> dahdi_hardware me muestra:
> >> pci:0000:04:06.0     wcfxo-       1057:5608 Wildcard X100P
> >>
> >> dahdi_cfg -v :
> >> DAHDI Tools Version - 2.1.0.2
> >>
> >> DAHDI Version: 2.1.0.4
> >> Echo Canceller(s):
> >> Configuration
> >> ======================
> >>
> >>
> >> 0 channels to configure.
> >>
> >> dahdi_scan:
> >> [1]
> >> active=yes
> >> alarms=UNCONFIGURED
> >> description=DAHDI_DUMMY/1 (source: HRtimer) 1
> >> name=DAHDI_DUMMY/1
> >> manufacturer=
> >> devicetype=DAHDI Dummy Timing
> >> location=
> >> basechan=1
> >> totchans=0
> >> irq=0
> >>
> >> Nada parece funcionar y realmente no se donde esta el error... alguna
> >> idea?
> >>
> >> _______________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090402/84242dcb/attachment.htm