[asterisk-users] Help with MFC/R2
Luis Morales
fastonion at gmail.com
Thu Sep 18 12:44:38 CDT 2008
I'm not sure but on E1 setup you can have only one way (in or out). In
my case i have 15 in and 15 out.
Told me more about your hardware:
- E1 cards
- How did you do to connect E1 interface to E1 asterisk's card ?
- You can receive calls ?
Please send us zapata.conf and unicall.conf
Regards,
Luis Morales
On Fri, Sep 19, 2008 at 12:46 PM, Dae Yeung Um <nowtek at gmail.com> wrote:
> All channels 1~15, 17~31 is supposed to be double way. To place and receive
> calls.
>
>
> The line is supposed be E1-MFC/R2 and works perfect with a Panasonic PBX,
> actually
>
> Exists any variant of MFC/R2? And how can I configure it to get working?
>
>
> Your help will be very appreciated!
>
>
> Thank you!
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Luis Morales
> Sent: Thursday, September 18, 2008 10:10 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Help with MFC/R2
>
> Ok,
>
> in your E1 setup:
>
> 1-15: to outgoing calls
> 16-30: for incomming calls
>
> ?
>
> Now for make calls your telephone company must be provide MFC-R2
> signaling. In your case the logs files show an invalid signal on make
> call.
>
>
> Regards,
>
> Luis Morales
>
> On Fri, Sep 19, 2008 at 10:10 AM, Dae Yeung Um <nowtek at gmail.com> wrote:
>> Hello
>>
>>
>> I got:
>>
>>
>> [Sep 17 19:24:50] DEBUG[4934] chan_unicall.c: unicall_call called -
>> 'g1/6055151'
>> [Sep 17 19:24:50] DEBUG[4934] chan_unicall.c: unicall_call caller id -
>> '1102'
>> [Sep 17 19:24:50] DEBUG[4934] chan_unicall.c: no UC_CATEGORY specified for
>> chan UniCall/1-1, using default NATIONAL_SUBSCRIBER
>> [Sep 17 19:24:50] VERBOSE[4934] logger.c: MFC/R2 UniCall/1 Call control(1)
>> [Sep 17 19:24:50] VERBOSE[4934] logger.c: MFC/R2 UniCall/1 Make call
>> [Sep 17 19:24:50] WARNING[4934] chan_unicall.c: Make call failed - Blocked
>> [Sep 17 19:24:50] VERBOSE[4934] logger.c: -- Couldn't call g1/6055151
>> [Sep 17 19:24:50] VERBOSE[4934] logger.c: MFC/R2 UniCall/1 Channel gains
>> [Sep 17 19:24:50] VERBOSE[4934] logger.c: MFC/R2 UniCall/1 Channel
> switching
>> [Sep 17 19:24:50] DEBUG[4934] chan_unicall.c: Hangup: channel: 1 index =
> 0,
>> normal = 11, callwait = -1, thirdcall = -1
>> [Sep 17 19:24:50] DEBUG[4934] chan_unicall.c: Updated conferencing on 1,
>> with 0 conference users
>> [Sep 17 19:24:50] VERBOSE[4934] logger.c: -- Hungup 'UniCall/1-1'
>>
>>
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Luis Morales
>> Sent: Thursday, September 18, 2008 8:17 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Help with MFC/R2
>>
>> Dae,
>>
>> Activate debug full:
>>
>> asterisk -vvvvvvvvvvvvvvvvvr
>>
>> in other console do:
>>
>> tail -vf /var/log/asterisk/full
>>
>>
>> Try to put call and send us more details about your logs
>>
>>
>> Regards,
>>
>> Luis Morales
>>
>>
>> On Thu, Sep 18, 2008 at 11:49 PM, Dae Yeung Um <nowtek at gmail.com> wrote:
>>> In fact I see 1101 in the rx bits on all channels...
>>>
>>> But I have in parallel one old Panasonic Key Phone system (Actually in
>>> production, to be replaced by asterisk), and it's works perfectly and
>>> immediately once I pass the E1 cables to there...
>>>
>>> So, the problem is not from Telco...
>>>
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Moises
> Silva
>>> Sent: Wednesday, September 17, 2008 10:57 PM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] Help with MFC/R2
>>>
>>> It seems to me your lines are blocked.
>>>
>>> Execute zttool and if you see 1101 in the rx bits, it means the telco
>>> (or whatever you have in the other end) has blocked their side. If
>>> this is a telco line you need to call them and tell them to unblock
>>> your lines.
>>>
>>> On Wed, Sep 17, 2008 at 10:33 PM, Dae Yeung Um <nowtek at gmail.com> wrote:
>>>> Thank you for the reply
>>>>
>>>>
>>>> I shutdown asterisk and tried again and I have to following logs...
>>>>
>>>>
>>>>
>>>> OUTGOING TEST :
>>>>
>>>> Testcall.conf
>>>> caller yes
>>>> destination-no 6055151
>>>> originating-no 7309130
>>>> protocol-class mfcr2
>>>> protocol-variant ar,20,4
>>>> circuits 1-2
>>>>
>>>> Log:
>>>>
>>>> ./testcall
>>>> Chan 1, class 'mfcr2', variant 'ar,20,4', end 2, caller 1, from
> '7309130'
>>> to
>>>> '6055151'
>>>> Chan 2, class 'mfcr2', variant 'ar,20,4', end 2, caller 1, from
> '7309131'
>>> to
>>>> '6055152'
>>>> Loading protocol mfcr2
>>>> Thread for channel 0
>>>> Thread for channel 1
>>>> MFC/R2 Chan 1: Call control(9)
>>>> MFC/R2 Chan 1: Unblock
>>>> MFC/R2 Chan 1: 1001 -> [1/BLOCKED /Idle /Idle ]
>>>> MFC/R2 Chan 2: Call control(9)
>>>> MFC/R2 Chan 2: Unblock
>>>> MFC/R2 Chan 2: 1001 -> [1/BLOCKED /Idle /Idle ]
>>>> MFC/R2 Chan 1: local_unblocking_expired
>>>> Chan 1: -- Local end unblocked! :-)
>>>> Chan 1: -- Local end unblocked! :-)
>>>> MFC/R2 Chan 2: local_unblocking_expired
>>>> Chan 2: -- Local end unblocked! :-)
>>>> Chan 2: -- Local end unblocked! :-)
>>>> Main thread
>>>>
>>>>
>>>> ----
>>>>
>>>>
>>>> Incoming test :
>>>>
>>>> Testcall.conf
>>>>
>>>> caller no
>>>> protocol-class mfcr2
>>>> protocol-variant ar,20,4
>>>> on-offered answer
>>>> circuits 1-2
>>>>
>>>>
>>>> Log:
>>>>
>>>> Chan 1, class 'mfcr2', variant 'ar,20,4', end 2, caller 0, from '' to ''
>>>> Chan 2, class 'mfcr2', variant 'ar,20,4', end 2, caller 0, from '' to ''
>>>> Loading protocol mfcr2
>>>> Thread for channel 0
>>>> Thread for channel 1
>>>> MFC/R2 Chan 1: Call control(9)
>>>> MFC/R2 Chan 1: Unblock
>>>> MFC/R2 Chan 1: 1001 -> [1/BLOCKED /Idle /Idle ]
>>>> MFC/R2 Chan 2: Call control(9)
>>>> MFC/R2 Chan 2: Unblock
>>>> MFC/R2 Chan 2: 1001 -> [1/BLOCKED /Idle /Idle ]
>>>> MFC/R2 Chan 2: local_unblocking_expired
>>>> MFC/R2 Chan 1: local_unblocking_expired
>>>> Chan 2: -- Local end unblocked! :-)
>>>> Chan 1: -- Local end unblocked! :-)
>>>> Chan 1: -- Local end unblocked! :-)
>>>> Chan 2: -- Local end unblocked! :-)
>>>> Main thread
>>>> Main thread
>>>> Main thread
>>>>
>>>>
>>>> Seems no any response from far side... Do you have any ideas??
>>>>
>>>>
>>>>
>>>> Only one time, I got the following log:
>>>>
>>>>
>>>> #./testcall
>>>> Chan 1, class 'mfcr2', variant 'ar,20,4', end 2, caller 0, from '' to ''
>>>> Chan 2, class 'mfcr2', variant 'ar,20,4', end 2, caller 0, from '' to ''
>>>> Loading protocol mfcr2
>>>> Thread for channel 0
>>>> Thread for channel 1
>>>> MFC/R2 Chan 1: Call control(9)
>>>> MFC/R2 Chan 1: Unblock
>>>> MFC/R2 Chan 1: 1001 -> [1/BLOCKED /Idle /Idle ]
>>>> MFC/R2 Chan 2: Call control(9)
>>>> MFC/R2 Chan 2: Unblock
>>>> MFC/R2 Chan 2: 1001 -> [1/BLOCKED /Idle /Idle ]
>>>> Chan 2: -- Protocol failure on channel 0, cause (32773) Unexpected CAS
>>> bit
>>>> pattern
>>>> Chan 1: -- Protocol failure on channel 0, cause (32773) Unexpected CAS
>>> bit
>>>> pattern
>>>> Chan 2: -- Protocol failure on channel 0, cause (32773) Unexpected CAS
>>> bit
>>>> pattern
>>>> Chan 1: -- Protocol failure on channel 0, cause (32773) Unexpected CAS
>>> bit
>>>> pattern
>>>> MFC/R2 Chan 2: local_unblocking_expired
>>>> MFC/R2 Chan 1: local_unblocking_expired
>>>> Chan 1: -- Local end unblocked! :-)
>>>> Chan 1: -- Local end unblocked! :-)
>>>> Chan 2: -- Local end unblocked! :-)
>>>> Chan 2: -- Local end unblocked! :-)
>>>> Main thread
>>>> MFC/R2 Chan 2: <- 1101 [1/BLOCKED /Idle /Idle ]
>>>> Chan 2: -- Far end blocked! :-(
>>>> Chan 2: -- Far end blocked! :-(
>>>> MFC/R2 Chan 1: <- 1101 [1/BLOCKED /Idle /Idle ]
>>>> Chan 1: -- Far end blocked! :-(
>>>> Chan 1: -- Far end blocked! :-(
>>>> Main thread
>>>> Main thread
>>>> Main thread
>>>>
>>>>
>>>>
>>>> But after rerunning the test, I only get the first log (w/o Far end
>>>> replies.)
>>>>
>>>>
>>>>
>>>> Any help will be really appreciated!
>>>>
>>>>
>>>>
>>>> Thank you!
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces at lists.digium.com
>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Moises
>> Silva
>>>> Sent: Wednesday, September 17, 2008 8:33 AM
>>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>>> Subject: Re: [asterisk-users] Help with MFC/R2
>>>>
>>>> That means someone else has already open the zap device, most likely
>>>> Asterisk. Just one application at a given time can open a zap device.
>>>> You cannot run testcall and Asterisk at the same time unless you make
>>>> sure they don't try to open the same channels.
>>>>
>>>> Moy
>>>>
>>>> On Wed, Sep 17, 2008 at 1:27 AM, Dae Yeung Um <nowtek at gmail.com> wrote:
>>>>> Hello
>>>>>
>>>>>
>>>>>
>>>>> I'm new in this list, but I have some experience working with asterisk
>>> and
>>>>> we are located in Bogota, Colombia.
>>>>>
>>>>>
>>>>>
>>>>> At now I'm having some problems configuring an E1 MFC/R2.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I have configured Unicall as indicated using the following versions,
> and
>>>>> everything "seems" to be correct, but I can't place or receive the
> calls
>>>>> (receive CHANUNAVAIL message)
>>>>>
>>>>>
>>>>>
>>>>> asterisk-1.4.21.2
>>>>>
>>>>> libsupertone-0.0.2
>>>>>
>>>>> spandsp-0.0.5
>>>>>
>>>>> chan-unicall-1.4-r01
>>>>>
>>>>> libunicall-0.0.6
>>>>>
>>>>> libmfcr2-0.0.6
>>>>>
>>>>> zaptel-1.4.11
>>>>>
>>>>>
>>>>>
>>>>> Inside asterisk, I can see the all UC channels active and Idle:
>>>>>
>>>>>
>>>>>
>>>>> asterisk*CLI> UC show channels
>>>>>
>>>>> Channel Extension Context Status Language
>>>>> MusicOnHold
>>>>>
>>>>> 9 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 10 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 11 from-pstn Idle en
>>>>> default
>>>>>
>>>>> (omitted)
>>>>>
>>>>> 34 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 35 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 36 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 37 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 38 from-pstn Idle en
>>>>> default
>>>>>
>>>>> 39 from-pstn Idle en
>>>>> default
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I configured the testcall.conf to check:
>>>>>
>>>>>
>>>>>
>>>>> destination-no 6055151
>>>>>
>>>>> protocol-class mfcr2
>>>>>
>>>>> protocol-variant ar,20,4
>>>>>
>>>>> protocol-end cpe
>>>>>
>>>>> on-offered accept
>>>>>
>>>>> circuits 9-10
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> But the system answer with:
>>>>>
>>>>>
>>>>>
>>>>> # ./testcall
>>>>>
>>>>> Chan 9, class 'mfcr2', variant 'ar,20,4', end 1, caller 0,
>>>> from
>>>>> '' to '6055151'
>>>>>
>>>>> Chan 10, class 'mfcr2', variant 'ar,20,4', end 1, caller
> 0,
>>>>> from '' to '6055152'
>>>>>
>>>>> Loading protocol mfcr2
>>>>>
>>>>> Failed to open channel: Device or resource busy
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Anyone has any Idea why I can't place or receive a call?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Your help will be really appreciated!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> DAE YEUNG UM
>>>>>
>>>>> _______________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>>>> Register Now: http://www.astricon.net
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> "I do not agree with what you have to say, but I'll defend to the
>>>> death your right to say it." Voltaire
>>>>
>>>> _______________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>>> Register Now: http://www.astricon.net
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>> _______________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>>> Register Now: http://www.astricon.net
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>>
>>> --
>>> "I do not agree with what you have to say, but I'll defend to the
>>> death your right to say it." Voltaire
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>> Register Now: http://www.astricon.net
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>>> Register Now: http://www.astricon.net
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>>
>> --
>>
> ----------------------------------------------------------------------------
>> -----
>> Luis Morales
>> Consultor de Tecnologia
>> Cel: +(58)416-4242091
>>
> ----------------------------------------------------------------------------
>> -----
>> "Empieza por hacer lo necesario, luego lo que es posible... y de
>> pronto estarás haciendo lo imposible"
>>
>> Leonardo Da'Vinci
>>
> ----------------------------------------------------------------------------
>> -----
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
>> Register Now: http://www.astricon.net
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> ----------------------------------------------------------------------------
> -----
> Luis Morales
> Consultor de Tecnologia
> Cel: +(58)416-4242091
> ----------------------------------------------------------------------------
> -----
> "Empieza por hacer lo necesario, luego lo que es posible... y de
> pronto estarás haciendo lo imposible"
>
> Leonardo Da'Vinci
> ----------------------------------------------------------------------------
> -----
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
---------------------------------------------------------------------------------
Luis Morales
Consultor de Tecnologia
Cel: +(58)416-4242091
---------------------------------------------------------------------------------
"Empieza por hacer lo necesario, luego lo que es posible... y de
pronto estarás haciendo lo imposible"
Leonardo Da'Vinci
---------------------------------------------------------------------------------
More information about the asterisk-users
mailing list