[asterisk-users] device probe order question

[Tzafrir Cohen]

On Thu, Sep 18, 2008 at 01:09:38PM -0400, Jason T. Nelson wrote:
> I have an Ubuntu 8 server running Asterisk 1.4 with three interface cards in
> it:
> 
> * Wildcard TDM400P
> * Wildcard TDM410P
> * Wildcard TE122
> 
> I'm using zaptel 1.4.11, and the difficulty I'm running into is that
> with EVERY reboot, the order in which the hardware appears changes. This
> makes ztscan cough up a different order for the spans, which makes it nearly
> impossible to use the Digium GUI as after reboots, it complains that the
> hardware has changed. Is there a way to lock down probe order on boot, or
> somehow write zaptel.conf in such a way that port and span assignments never
> change between reboots?

Those cards use each a different driver. Write those driver, in your
preffered order, in /etc/modules .

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir