[asterisk-users] Digium Hardware Echo Cancellation

[Remi Quezada]

Do a 'make menuselect' when you install zaptel driver and make sure in 
the  'Binary Firmware Package' either ' FIRMWARE-OCT6114-064' or ' 
FIRMWARE-OCT6114-128' is selected depending on which echo cancellation 
module you have.  If you are unsure select both.

Remi

Klaverstyn, David C wrote:
>
> Hi All,
>
>  
>
> When using a Digium card with a hardware echo cancellation module 
> installed, is the only thing required to enable it, is to set 
> echocancel=yes in zapata.conf?
>
>  
>
> I think I remember seeing somewhere that you need to make a change in 
> the zaptel Makefile to allow the echo cancellation to work.  Is that 
> correct and if so what is it?
>
>  
>
> Regards
>
> David.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users