[asterisk-users] SetCallerPres

[Steven Howes]

asterisk-1.4.21.2
libpri-1.4.7
zaptel-1.4.11

I might be being a muppet here (not used PRI with Asterisk before) so  
humor me.. I am using SetCallerPres on an outbound call over PRI...  
Console shows:

     -- Executing [07XXXX03393 at from-sip:8] SetCallerPres("SIP/XXX.XXX. 
209.243-08b81d68", "prohib_failed_screen") in new stack

Which is what I want.. However pri debug shows:

 > Calling Number (len=12) [ Ext: 0  TON: National Number (2)  NPI:  
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
 >                           Presentation: Presentation permitted,  
user number passed network screening (1)  '1XXXX598' ]

Which seems a bit odd to me... Just for completeness I did a  
allowed_passed_screen

     -- Executing [07XXXX03393 at from-sip:8] SetCallerPres("SIP/XXX.XXX. 
209.243-b760f2d8", "allowed_passed_screen") in new stack

 > Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI:  
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
 >                           Presentation: Presentation permitted,  
user number passed network screening (1)  '1XXXX59849' ]


Again it doesn't appear to be listening to me.. Am I missing something  
obvious or is there actually something wrong here... Can post zap  
configs if needed..

Thanks in advance.

Steve