[asterisk-users] Calling '**1' through Asterisk

[Andrew Joakimsen]

Asterisk 1.4.20.1
Polycom 501 v 3.0.1.0032

[May 30 00:12:54] NOTICE[26924]: chan_sip.c:14033
handle_request_invite: Call from 'SIP_PEER' to extension '**1'
rejected because extension not found.


[May 30 00:14:25] NOTICE[26924]: chan_sip.c:14033
handle_request_invite: Call from 'SIP_PEER' to extension '**' rejected
because extension not found.

I did not even modify the dial plan on the phone, just press **1 and
dial. Make sure the configuration (dialplan) on the Linksys is
correct, see http://spc.pifiu.com for details.


On Thu, May 29, 2008 at 7:59 AM, Henrik Østergaard Madsen
<Henrik at ostergaard.net> wrote:
> No it is unfortunately not that. Calling '**11' in stead DOES come
> out with an 'extension not found'. But '**1' does not come with ANY
> output except for the sip logging. And I DO have '**1' defined in
> the extensions. '**' does not produce any output either, and this is
> not defiend in extensions. The sip package dump in the former post
> was the entire output from Asterisk..
>
> From my point of view it is beginning to look like a bug in Asterisk
> rather than a configuration issue :-(
>
> Regards
>
> Henrik
>
>
>> seems like asterisk could not find the extension number "**1". does
>> your
>> context "from-internal" have this extensions? if not then create one
>> or
>> include the context which contains the extension **1 in
>> from-internal and
>> then try.
>>
>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>