[asterisk-users] Card loading order...

[Steve Totaro]

On Mon, May 26, 2008 at 5:23 PM, Carlos Chavez <cursor at telecomabmex.com> wrote:
>     I am having a problem with a couple servers.  They both have a Digium
> TE110P and a TDM04B card.  I have setup the system so the TE110P uses channels
> 1-31 and the TDM04B 32-35.  The problem is that when we reboot the server
> sometimes the TDM04B is recognized first and the TE110P second so the
> configuration fails.
>
>     I do not know why this happens and to solve this I have to do a "service
> zaptel stop" and then start the service again so the cards will be loaded in
> the proper order.  My /etc/sysconfig/zaptel file lists the TE110P module first.
>
>     Is there any way to make sure the cards always load in the same order?
>
> --
> Carlos Chavez
> Director de Tecnología
> Telecomunicaciones Abiertas de México S.A. de C.V.
> Tel: +52-55-91169161 Ext 2001
>

I guess you could load the zaptel modulesin rc.local in the correct
order and see if that fixes it.  Obviously, getting rid of the current
method of starting the "DAHDI Service" (sounds obscene)

Thanks,
Steve Totaro