[asterisk-users] forwarding pots lines

Eric Fort eric.fort at gmail.com
Fri May 23 03:04:20 CDT 2008


will an ata directly connect to another remote ata thus emulating a long
phone cord?  also most of the ATA's I've seen drive a phone rather than
accepting a line from the telco.

Eric

On Thu, May 22, 2008 at 10:17 PM, Alex Balashov <abalashov at evaristesys.com>
wrote:

> Eric Fort wrote:
>
> > I'm looking for a simple hardware solution where I can connect POTS
> > lines at one place and make them appear transparently at another
> > location with only SIP and the internet between the locations.  If I'm
> > thinking this out right one location would need a box with a bunch of
> > fxo interfaces and the other would need a box with a equal number of fxs
> > interfaces.  I'd like this to essentially emulate a really long piece of
> > phone wire in as many ways as possible.  What hardware should I use and
> > what is the best way to provision this.  I'd prefer to forgo the expense
> > of 2 full asterisk servers as this seems unnecessary for the application.
>
> You can use devices called ATAs (Analogue Telephone Adaptors).  They are
> much cheaper.
>
> --
> Alex Balashov
> Evariste Systems
> Web    : http://www.evaristesys.com/
> Tel    : (+1) (678) 954-0670
> Direct : (+1) (678) 954-0671
> Mobile : (+1) (706) 338-8599
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080523/039848a0/attachment.htm 


More information about the asterisk-users mailing list